Take the 2-minute tour ×
Server Fault is a question and answer site for system and network administrators. It's 100% free, no registration required.

I have a Netgear switch which supports VLANs. I want to separate two networks, each one having its own internet gateway and servers, but I want all users from the two VLANs to be able to access the same ethernet printer.

Having never configured a VLAN, what are the steps to configure these so that the networks are separated (ie no access between them) and that they can acces the same printer ?

If someone who has already used a Netgear switch could help me with the specific steps, that would be really great.

Many thanks

share|improve this question
    
Do they share the same router at the edge? –  gravyface Feb 1 '12 at 15:31
    
doh, ok so you don't have any gear yet besides the one Netgear switch? –  gravyface Feb 1 '12 at 15:35
    
Could a cisco 1600 do this ? I have one with 2x 10mbit/s Ethernet. –  oimoim Feb 3 '12 at 8:33
    
10Mb is going to be slow. What kind of a budget do you have? –  gravyface Feb 3 '12 at 12:27
    
Virtually no budget :) –  oimoim Feb 7 '12 at 16:18

3 Answers 3

Put the printer on a third VLAN and ensure that both user VLANs have access to it via the router.

share|improve this answer
    
This method allows you to keep vlan 1 and 2 separate while still granting access to your printer. A fairly simple method that’s easy to implement and manage. Good idea. –  Ben Campbell Feb 1 '12 at 15:46
    
Unfortunately, I have only got a Cisco 1600. But my solution works. Many thanks. –  oimoim Feb 7 '12 at 16:18
    
You might be able to do a router-on-a-stick configuration. –  MikeyB Feb 7 '12 at 18:12

HP LaserJet 4100 Series Printers can have two EIO-format ethernet ports, this would work but you may find adding some basic routing and/or firewalling into your network would be cheaper/easier.

share|improve this answer
    
This printer unfortunately has only one ethernet adapter with a single port on it. –  oimoim Feb 1 '12 at 15:29
2  
Right, you said 'a printer', not 'an existing single port printer', this site's for pro sysadmins who list the kit they're asking about unless the make/model isn't chosen yet - I doubt VERY much indeed that this existing printer support VLAN trunking, which is the only way of doing this without routing in place. –  Chopper3 Feb 1 '12 at 15:33
    
Indeed, it doesn't support VLAN trunking. –  oimoim Feb 7 '12 at 16:18
up vote 1 down vote accepted

Ok guys, many thanks for your help. I have found a more practical solution. I have attached an ethernet print server to one of the printer's usb ports and connected the ethernet to the other VLAN.

This gives the printer dual ethernet ability :)

Never thought I could use the ethernet port and the usb port simultaneously.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.