Server Fault is a question and answer site for system and network administrators. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I am tryign to setup 2 networks for my company. I need 1 network for the first room and another network on the second room. Each room can't access another room's computer. I have setup 2 workgroups for each room but it seems that the workgroup can't setup passwords. Every computer is in the same subnet with static ip. They all connect to a switch -> router -> modem.

Router: Linksys WRT54G Switch: Intellinet

Any thoughts? Thanks a lot.

share|improve this question

migrated from Feb 15 '12 at 21:39

This question came from our site for information security professionals.

closed as not a real question by Massimo, Sven, Zoredache, John Gardeniers, MDMarra Feb 15 '12 at 22:43

It's difficult to tell what is being asked here. This question is ambiguous, vague, incomplete, overly broad, or rhetorical and cannot be reasonably answered in its current form. For help clarifying this question so that it can be reopened, visit the help center.If this question can be reworded to fit the rules in the help center, please edit the question.

Do you have the stock firmware on the wrt54g? If so, then you can't really do anything. If you have some other firmware, please tell us. – Zoredache Feb 15 '12 at 21:48
Why this landed here and not in SuperUser I don't know...I suspect folks are going to vote-to-close to move it yet again... – Avery Payne Feb 15 '12 at 22:08
You may be better off looking into the use of VLANs on the switch rather than trying to do this with the router. – John Gardeniers Feb 15 '12 at 22:15

The dd-wrt firmware supports VLANs.

share|improve this answer

Not the answer you're looking for? Browse other questions tagged or ask your own question.