Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I just want to create a sharing folder which is used from different networks. There is no way to create with the help of Samba,

İs there any way for this issue?

192.162.2.162 -----> Folder <----------10.1.1.20

share|improve this question

closed as not a real question by Khaled, Chris S Feb 21 '12 at 14:11

It's difficult to tell what is being asked here. This question is ambiguous, vague, incomplete, overly broad, or rhetorical and cannot be reasonably answered in its current form. For help clarifying this question so that it can be reopened, visit the help center.If this question can be reworded to fit the rules in the help center, please edit the question.

2  
What is your problem with samba? Your question is not clear. –  Khaled Feb 21 '12 at 12:56
    
a folder will be reached from two different netwotrks. Is there any way? 192.162.2.162 -----> Folder <----------10.1.1.20 –  Süleyman Şengül Feb 21 '12 at 12:58
1  
What is the relation of this with samba? If you setup your network right, you should be able to reach the folder. –  Khaled Feb 21 '12 at 13:07
    
is there any way to create a file which is shared between us(you and me) ? –  Süleyman Şengül Feb 21 '12 at 13:18
    
Yes if you give me your IP address and it is allowed for me to reach this IP. –  Khaled Feb 21 '12 at 13:29

1 Answer 1

up vote 1 down vote accepted

This isn't a share issue. It's a bridging the networks issue. You need to have it set up so that the two networks are routed in a way to see each other, either through a router or a computer with two network interfaces configured to act as a router. Then when traffic is destined for the other network, the router handles the translation.

Or you set up a VPN to bridge the networks, in which case you're still dealing with a routing issue.

Then you just set up your share and connect to it by mapping; easiest would be by IP, but if you have an internal DNS server you could connect by name.

share|improve this answer

Not the answer you're looking for? Browse other questions tagged or ask your own question.