Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

Where can I find the procedure for replacing a disk in an EMC CX2-30 san.

Amber light showing on one disk, NaviSphere shows the disk status as "Requested Bypass"

The affected LUN is in a RAID 5 configuration.

There are two hot spares in the unowned LUN, one has status "Hot spare ready". The other has status "Enabled".

share|improve this question

2 Answers 2

Here is what I would do.. I would move one of the two hotspares over to the raid5 lun so it can begin to rebuild it.. once rebuilt just remove the disk and put in a replacement.

If still under warranty EMC will send a tech out to do it.

share|improve this answer

From EMC Powerlink you can download the Unisphere Service Manager, install this on a management station with access to the array via https. It will have a wizard in it to guide you through the drive replacement after confirming it has moved over to hot spare/etc.

Again, if you have support on the array though, EMC will dispatch a technician to replace it for you.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.