Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I have an HPUX NTP Server. It is the server for a dumb client device that has NTP built-in. I can tell the client the server IP and interval but cannot get any logging out.

How do I know if NTP syncronization is taking place.

Ordinarily, I would go to the client and run:

ntpq -p

but in this case the client can't do that. Is it possible to get a list of clients syncronized with my NTP server from the server itself?

share|improve this question
add comment

2 Answers

up vote 6 down vote accepted

tcpdump port 123 ?

ntpdc -c monlist might also work as well, though I don't have a ntp server handy to test.

share|improve this answer
1  
ntpdc -c monlist works properly here under various distribution of the ntp 4.2.4 release. –  Magellan Feb 23 '12 at 0:33
1  
I would add a -n to your ntpdc as well, just to speed things up, if you don't have reverse DNS setup for all your hosts. –  Zoredache Feb 23 '12 at 0:38
add comment

You can check for traffic from the device to be sure synchronizing is attempted (named in the other answers) but the device still has to do something with the answer. Without (remote) logging or some status display you can't say for sure the device is synchronized.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.