I noticed that RAID 5 has been used for a lot of critical application such as SQL server machine. However RAID 10 seems to be a lot more robust. But not much people using it. Any reason why or when should we consider RAID 10 or never?
migrated from stackoverflow.com Mar 1 '12 at 4:08
This question came from our site for professional and enthusiast programmers.
closed as not a real question by Zoredache, Ward, MikeyB, Shane Madden♦, Mark Wagner Mar 1 '12 at 7:04
It's difficult to tell what is being asked here. This question is ambiguous, vague, incomplete, overly broad, or rhetorical and cannot be reasonably answered in its current form. For help clarifying this question so that it can be reopened, visit the help center. If this question can be reworded to fit the rules in the help center, please edit the question.
Wikipedia say :
For details visit :
For RDBMS's, some good arguments at: http://www.baarf.com/
RAID 5 is used a lot due to cost issues, and many people use it as a "default" without thinking further.
This question will depend greatly on your hardware, server workload and storage capacity.
For example, Raid 10 can have considerable performance increases over Raid 5 (especially on random or small writes), but storage capacity is cut in half. The performance differences may not even be noticeable depending on the load, so the Raid 5 with the extra space may be more appealing.
Let's assume we have 12 1TB hard drives. In a raid 5 we would get:
Downsides to Raid 5:
Now take 12, 1TB hard drives in a raid 10:
For me, if I am on the fence between a 10 or 5 then I usually go with a RAID 50. This is a good balance between the two (cards that support Raid 50 can get expensive though).
Again, a lot of variables will go into performance on these things: quality of the raid card, speed of the drives, number of drives in your pool, disk/strip alignment in databases, etc.
As mentioned before, most go straight for RAID5 due to cost issues. I use RAID10 for my small setups at work due to them being easier to recover if something goes wrong. If more than one disk goes, there is nearly 0 chance of recovery. With RAID10, for files at least, you have the ability to recover partial bits when things go wrong.
+1 for the BAARF above.