hostname command returns results from DNS and
hostname is equivilant to
uname -n and is the actual "hostname" or "nodename" of the box.
All the other
hostname arguments use this nodename to look up info.
So before going any further, I should explain the
/etc/hosts file format.
The first field is fairly obvious, its the IP address all the hostnames on the line should resolve to. The second field is the primary hostname for that IP. The remaining fields are aliases.
So if you run
hostname -f it will first try to resolve the IP for your nodename. Depending on how you have the
hosts: entry configured in
/etc/nsswitch.conf this method will vary.
- If you have it configured to use dns, it will use the search domains configured in
/etc/resolv.conf until it gets an IP back from DNS.
- If you have it configured to use files it will look in
/etc/hosts to find a line where either the primary hostname or the alias name is your current nodename (
uname -n), and then return the primary hostname in that line.
Once it has the IP it will then try a reverse lookup on that IP. Again it will use DNS for this and your hosts file based on your
nsswitch.conf. In the case of using your hosts file, it will return the primary entry (which is the first field after the IP in the file).
hostname -a will only work with the hosts file since doing a reverse lookup in DNS only gives you 1 result. With the hosts file it return the alises in the matching line (which is everything after the first entry, the primary hostname).
If your nodename is 'foobar', and you have an entry in
/etc/hosts such as this:
127.0.0.1 foobar.example.com foobar localhost.localdomain localhost
Then you will get the following command results:
# uname -n
# hostname -f
# hostname -a
foobar localhost.localdomain localhost