Our company had two separate offices and there were VPN-tunnel between those offices. ERP software was on Office 1 network and users on Office 2 used it through VPN-tunnel. Everything was fine, there were anything problem on connection to ERP from Office 2 until when Office 2 moved to same building with Office 1.
Network was changed during office moving and VPN-tunnel was removed because Office 2 don't need it anymore to access ERP.
Both offices are in different subnets. We use Zyxel USG-20 to separate networks, in interface 1 is Office 1 network (10.10.10.0) and in interface 2 is Office 2 network (10.10.20.0).
Basicly network is ok and there are no hangups or disconnection but there are ERP are disconnections and hangups between workstation and ERP server. Somehow ERP process gets killed by Signal 1.
Could faulty cable / network switch / increased network traffic cause session to kill by signal 1?
Is there anything way to monitor it without changing everything network hardware?