Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I have a set of hp servers that are HP dl380 E5620 G7s that are used as ESX 4.1 servers. I have them set up to do vmotion and to do fault tolerance. I've just received another set of servers, however they are E5649s.

The E5620s are 8 core dual proc while the E5649s are 6 core dual proc.

My gut tells me that these two different hardware specs won't be compatible with each other for the purposes of vmotion/fault tolerance, so I want to return them, but I need confirmation of it before I return them.

I'm simultaneously asking you guys as I'm contacting vmware as I can't find anything for or against this for compatibility issues on their site.

share|improve this question
    
Are they both intel or both amd? You may be able to turn off enchanced vmotion and get it to work. That will disable DRS inside the cluster though. –  TimK Mar 26 '12 at 19:18
add comment

1 Answer 1

up vote 7 down vote accepted

Yes, this combination will work. (BTW, the E5620 is a quad-core CPU - 8 total cores)

The CPU models you've listed are in the same family, so there aren't any major differences in the available instruction sets on the respective CPUs.

Here's the official VMWare Intel matrix. Your CPUs are listed as the "Intel 56xx series".

For systems that are less similar or of different CPU generations, the VMWare Enhanced vMotion Compatibility (EVC) masks can be set to allow a baseline CPU instruction set to work in a cluster.

share|improve this answer
1  
"VMotion Between Single-Core and Multi-Core Processors Migrations between single-core and multi-core Intel processors are supported, as long as the source and target CPUs have compatible CPU features (or the features are masked) as outlined in the tables above. " I just need to make sure they don't have different feature sets and I should be good. Doubt this is the same problem since they are the same series. –  Jonathan Mar 26 '12 at 19:33
    
Your CPUs are of the same family. There is no difference in the instruction set. –  ewwhite Mar 26 '12 at 19:35
    
@Jonathan Since they're both in the 56xx series, they should match; if they don't, there's always EVC. –  Shane Madden Mar 26 '12 at 19:36
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.