Take the 2-minute tour ×
Server Fault is a question and answer site for system and network administrators. It's 100% free, no registration required.

I'm what I guess you might call an accidental sys admin. I don't have the training, and the guy who used to do this left last month, so I'm it.

Before he left, he requisitioned a new Windows Web Server 2008 R2, which just arrived today. So, I've got to put it into the rack and get it joined to our domain. We're using a Windows 2003 R2 Active Directory. Naturally, I want this join this new server to our domain as a member server, but I've never set up a server before, so what steps do I have to do, to get this up and running?

share|improve this question

3 Answers 3

up vote 1 down vote accepted

Join the server to your domain just like you would any client computer running XP or 7. There's nothing special you have to do, just because it's a server.

The trick would come in if you wanted it to also be a domain controller (and even then, it's not that hard). Not all servers on the network are domain controllers.

About the only things you'll need to do different for this server are give it a static IP address and make sure to install Web server role from the server management screen that should open up when you log in. You may also want to turn on the .Net 3.5 feature, if it's to run an asp.net web site.

share|improve this answer
    
Eventually we will want to give the new server a static IP address. However, it just occurred to me that we could probably wait to assign a static IP address to it. We've got to copy our websites to it and test them first, before we move the outbound IP address to it. I don't want to make this a DC, as it's a 2008 R2 box, and our current DC's are 2003 R2. Someday we'll migrate, but that's down the road. –  Rod Apr 20 '12 at 14:34
    
On that note, if you're gonna host websites on it, yea don't run it as a DC.... but consider doing it soon. You've got 3 years until 2003 isn't supported any longer. :) –  JohnThePro Apr 20 '12 at 16:28

Please refer to this EXCELLENT Microsoft TechNet Article about joining a new machine to a domain. It's quite easy. I'd also like to reiterate that the new server's DNS settings should be pointed to the Domain Controller.

PS - The second link says Windows 7; ignore that. Just follow the directions if you need them.

share|improve this answer

Follow the same steps as a Windows 2003 server. You don't have to do anything different if the member server is a version ahead of your domain controllers. Just go to System Properties, and join it to the domain. As with all things of this type, make sure it's using the DC(s) as its only DNS servers.

/edit - and if this gets your palms sweaty, then you need to be prepared to learn on-the-job very quickly, and might be wise to get a list of immediate things you need help with and can hire a consultant to 1) Do and 2) teach you what they're doing as they go.

share|improve this answer
    
I hope they'll let me hire a consultant, if necessary. We're dirt poor. –  Rod Apr 19 '12 at 21:22
    
Something I just thought of; I believe the former sys admin said that our DC's are not DNS servers. We've got a router, placed here by the IT staff of the university we're a part of, and I believe the former sys admin said that the router is the DNS server. How do I determine what is the DNS server? I just got into the command prompt, did a ipconfig and found that the IP address isn't the same as either of our DC's. –  Rod Apr 19 '12 at 21:30
1  
Your DCs will almost certainly be DNS servers. However, if your DCs are not being used as DNS servers by your client machines, then Active Directory will be horribly broken. AD and DNS are inextricably linked. –  Chris McKeown Apr 19 '12 at 21:46

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.