Take the 2-minute tour ×
Server Fault is a question and answer site for system and network administrators. It's 100% free, no registration required.

My SCOM server has two network cards. One is normal network while the other is connected to the "switch" VLAN. If I try discovering network devices in SCOM I get "No Response Ping", no matter which switch I try to discover. From the server I'm able to ping the switch, but not if I use the "-S" flag (source address) and set the source address to the normal network card. How can I "tell" SCOM to use the other network card, or maybe both, when discovering network devices?

share|improve this question

1 Answer 1

I found this blog post http://www.code4ward.net/main/Blog/tabid/70/EntryId/105/Troubleshooting-Network-Discovery-in-SCOM-2012.aspx Added ping.exe and monitorhost.exe as allowed in the firewall and everything worked perfectly!

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.