Server Fault is a question and answer site for system and network administrators. It's 100% free, no registration required.

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

If I want to return to the factory IOS and configurations of the AP only, I must issue this command:

service-module wlan-ap0 reset default-config

right?

But which IOS is going to replace the current?

share|improve this question
up vote 0 down vote accepted

I think that will only reset your configuration so the IOS should be the same as the one running on the device when you issue the command.

http://www.cisco.com/en/US/docs/routers/access/800/860-880-890/software/configuration/guide/admin_ap_ps9572_TSD_Products_Configuration_Guide_Chapter.html#wp1057756 seems to confirm this.

share|improve this answer
    
But if I have a corrupted IOS, how do I reset it do the factory default also? – Jonathan Rioux Apr 25 '12 at 14:26
    
The "hard" bit is getting the IOS image file. Put the new IOS in the TFTP server's directory, then run this from the AP's command line (not in configure terminal mode): archive download-sw /overwrite /reload tftp://10.20.30.xx/name-of-image-you-downloaded Let it run the update, it will reboot itself. – Jontas Apr 25 '12 at 14:29
    
Jontas, I cannot run any of these command ("archive" command) from the AP module, it is corrupted. – Jonathan Rioux Apr 25 '12 at 14:32
    
This is a bit from what I actually knows then ... I think this post might help you though itknowledgeexchange.techtarget.com/network-technologies/… – Jontas Apr 25 '12 at 14:44

This link helped me out. Creating a bridge from the Host Router to the Integrated AP allowed me to copy files from the host routers flash via TFTP. http://rickysnetworkblog.blogspot.com.au/2016/03/ios-recovery-on-embedded-ap-in-cisco.html

share|improve this answer
    
Links to external resources are encouraged, but the salient information from the link should be included in the post. In general it’s best for answers to be as self-contained as possible. Always quote the most relevant part of the external resource as its URL may change or go permanently offline. – Anthony Geoghegan Jun 14 at 14:08

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.