Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I set up a little NAS system for my personal use. It's an Ubuntu system running on a fan-less Atom-powered mini ATX mainboard which I extended with a usb3 pci card to get best possible performance for the whole system. There are 2 USB3 external drives which I write to using Gigabit ethernet.

I get ~12 Mb/s writing to the NAS and roughly 75 when reading. (I'm good with that reading rate.)

The Ubuntu is running on a usb pendrive and is rather slow in terms of write operations, but writing to the pendrive should not be involved in the process - right?

I set up a web server on my computer and used wget to pull a large file into /dev/null. I copied with 70Mb/s and more which is good. Writing to the usb mount instead gives me the ~13 Mb/s I already saw from the smb transfer.

When I connect the external drives directly to my computer I get insane writing speeds. Could you guys give me a hint as to how to find the bottleneck?

share|improve this question
    
Further specifications on the hardware and setup would help. –  Bobby Apr 30 '12 at 13:15
    
this mainboard: asus.com/Motherboards/Intel_CPU_on_Board/AT5NM10TI a pci usb3.0 card (nec chipset) and the latest ubuntu (12.04) –  Niksac Apr 30 '12 at 14:20
    
i did some more research and found out the NTFS file system of the hdds might be the problem. Does anyone have anymore informaiton about ntfs performance ? –  Niksac Apr 30 '12 at 14:47
add comment

1 Answer 1

up vote 2 down vote accepted

This was totally a filesystem issue. The Linux ntfs-3g driver is just to slow to perform at reasonable speed. Bot HDDs are now formatted with EXT4 and the speed increased to more than 70mb / S.

I wanted ntfs to be able to quickly connect the drives to my Windows PC which now needs a plugin to handle the EXT4 Drives.

share|improve this answer
2  
If it's a NAS, then the filesystem can be anything because you're exposing the files through another protocol like NFS or CIFS. Direct-attached storage is another story. –  Joel E Salas May 1 '12 at 22:17
1  
my Windows PC which now needs a plugin to handle the EXT4 Drives. This should not be the case if what you have built has even a slight passing resemblance to what the rest of the planet would call a NAS. If you really do need a plugin then congratulations, you've managed to get it wrong in a way that's actually more difficult than getting it right would have been. –  RobM May 1 '12 at 22:57
    
Whats wrong about keeping the possibility to quickly take one of the drives from the nas and attach it directly to the computer? I chose the low budget way - why give away the advantages. I'm (usually) accessing the files via Samba Ftp and a coud storage solution... sounds like Nas to me –  Niksac May 12 '12 at 12:16
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.