Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

This is the first time for me to work with Cisco Router.

The below mentioned is my configuration where

Cisco Srv is Cisco 7200 Series Router XYZ is one VPN Server running on Linux. RAC is the Remote Access VPN Client

| RAC |-----> | XYZ | ===== | Cisco Srv |

The configuration for the Cisco Srv:

no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
service internal
!
hostname Cisco7200
!
aaa new-model
!
!
aaa authorization network hw-client-groupname local
aaa session-id common
enable password cisco
!
memory-size iomem 16
clock timezone - 0 6
ip subnet-zero
no ip source-route
!
!
ip domain-name cisco.com
!
ip audit notify log
ip audit po max-events 100
!
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp client configuration address-pool local dynpool
!
crypto isakmp client configuration group hw-client-groupname
key hw-client-password
dns 30.30.30.10 30.30.30.11
wins 30.30.30.12 30.30.30.13
domain cisco.com
pool dynpool

crypto isakm profile VPNclient
description VPN clients profile
match identity group hw-client-groupname
isakmp authorization list hw-client-groupname
client configuration address respond

crypto ipsec transform-set transform-1 esp-3des esp-sha-hmac
crypto dynamic-map vpnclient 1
set transform-set transform-1
set isakmp-profile VPNclient
reverse-route
!
crypto isakmp policy 10
encr aes 256
hash sha
authentication pre-share
group 2

crypto isakmp key somestrongkey address 0.0.0.0 0.0.0.0

crypto ipsec transform-set ts esp-aes 256 esp-sha-hmac

ip access-list extended vpn
deny ip 192.168.1.22 255.255.255.255 20.1.1.0 255.255.255.0
permit ip 192.168.1.22 255.255.255.225 any
crypto dynamic-map vpndynamic 10
set transform-set ts
match address vpn
reverse-route 

crypto map dynmap 1 ipsec-isakmp dynamic vpnclient
crypto map dynmap 10 ipsec-isakmp dynamic vpndynamic

interface FastEthernet1/0
ip addr 192.168.1.22 255.255.255.0
no shutdown
crypto map dynmap
no cdp enable
!
interface f1/1
description connected to HQ LAN
ip address 30.30.30.1 255.255.255.0
no shutdown
speed auto
no cdp enable
!

ip local pool dynpool 30.30.30.20 30.30.30.30
ip classless
ip route 20.1.1.0 255.255.255.0 192.168.1.2 
no ip http server
ip pim bidir-enable
!
!
no cdp run
!
line con 0
line aux 0
line vty 0 4
password cisco
!

end

I can individually create a tunnel between Cisco Srv and RAC also between Cisco Srv and XYZ. But when the tunnel between Cisco Srv and XYZ is established, i can't create a tunnel with RAC from Cisco Srv.

Thanks in advance.

share|improve this question
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Browse other questions tagged or ask your own question.