Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I've been a bit bothered by NFS4 on Linux. Some information 'out there' seems to conflict with other information, and other information appears hard to find. So here are a couple of things that caught my attention, hopefully someone out there can shed some light on this.

This question focuses exclusively on NFS4 without Kerberos etc.

1. Exports

There is ambiguous information in the exports manpage on the structure of /etc/exports.

To quote from exports(5):

Also, each line may have one or more specifications for default options after the path name, in the form of a dash ("-") followed by an option list.

The option list is used for all subsequent exports on that line only.

What does "subsequent exports on that line only" mean?

1.2 fsid=0 not required anymore?

I was searching for fsid when I found a comment on the linux-nfs list stating fsid=0 is not required anymore. Now I'm just confused, do I need it with nfs4 or not?!

2. Non-exported directory still mountable

Say I have the following tree:

/exp
/exp/users
/exp/distr
/exp/distr/archlinux
/exp/distr/debian

And I have the following entries in this fstab entry:

/dev/disk/by-label/users  /mnt/users  ext4  defaults  0  0
/dev/disk/by-label/distr  /mnt/distr  ext4  defaults  0  0
/mnt/users                /exp/users  none  bind      0  0
/mnt/distr                /exp/distr  none  bind      0  0

And my exports is exactly this:

/exp       192.168.1.0/24(fsid=0,rw,async,no_subtree_check,no_root_squash)
/exp/distr 192.168.1.0/24(rw,async,no_subtree_check,no_root_squash)

And exportfs -arv shows:

exporting 192.168.1.0/24:/exp/distr
exporting 192.168.1.0/24:/exp

Then why am I able to do this and get no error on a client:

mount -t nfs4 server:/exp/users /tmp/test

Even though /exp/users is not exported? I didn't export this directory, and while I don't see the contents of /dev/disk/by-label/users unless I specify crossmnt, I am still able to write to the directory. Everything I write to there goes to the underlying directory of /exp/users which can be seen when I umount /exp/users; ls /exp/users..

3. The odd case of showmount -d server

As stated by rpc.mountd(8), this command should display directories that are either currently mounted by clients, or stale entries in /var/lib/nfs/rmtab, as can be read:

The rpc.mountd daemon registers every successful MNT request by adding an entry to the /var/lib/nfs/rmtab file. When receivng a UMNT request from an NFS client, rpc.mountd simply removes the matching entry from /var/lib/nfs/rmtab, as long as the access control list for that export allows that sender to access the export.

(...)

Note, however, that there is little to guarantee that the contents of /var/lib/nfs/rmtab are accurate. A client may continue accessing an export even after invoking UMNT. If the client reboots without sending a UMNT request, stale entries remain for that client in /var/lib/nfs/rmtab.

After reading this I surely wonder:

  1. Isn't it terribly insecure to just expose this type of client information;
  2. Aren't unaware server admins bound to have an rmtab with a lot of stale clients;
  3. Is this the reason that clients that mount nfs4 directories with mount -v get to see output like "nothing was mounted" even though something was mounted?

I have a lot of other questions regarding nfs4, but I'll keep it at this for the moment.. :)

share|improve this question
    
Maybe export list doesn't like your strange bind mounted filesystems. Try first with /mnt/users... –  Jiri Xichtkniha May 15 '12 at 19:58
    
This is about nfs4, which requires a "pseudo file system" i.e. a one tree file system hierarchy. Can you clarify what you mean, please? –  drumfire May 17 '12 at 15:19
    
This wiki page also claims that fsid=0 is not required anymore: wiki.linux-nfs.org/wiki/index.php/…, but 'man exports' still implies it is required –  SystemParadox Aug 2 '12 at 11:25
1  
I'd like to say I support this question. Like you I have observed many of the same things, and have the same question and more. It seems like an f*ing mess. –  Cyclone Aug 3 '12 at 22:31
add comment

1 Answer

Great questions, highlights a bigger point with the documentation IMO. Here is an attempt at a complete answer:

What does "subsequent exports on that line only" mean?

An example's probably easiest here:

/export/stuff -rw 10.0.0.54 10.0.0.55

is equivalent to:

/export/stuff 10.0.0.54(rw) 10.0.0.55(rw)

Is fsid=0 not required anymore?

This depends on your use case. It looks like you are exporting regular disk based filesystems from the rest of your query, in that case you are best to drop fsid=0 (which in nfsv4 changes the behavior to reference the root filesystem of the export).

To change this behaviour remove the no_subtree_check option


rmtab-related stuff

  • Is the handling of rmtab a security risk?
    I guess it depends on your use case to answer that, on my network it doesn't present a credible information leak but i can see cases where it could potentially.
  • Won't rmtab be full of stale entries?
    Potentially yes, again depending on your deployment scenario / use case.
  • Is this why some clients running mount -v erroneously see "nothing was mounted"?
    I've not come across this yet
share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.