Take the 2-minute tour ×
Server Fault is a question and answer site for system and network administrators. It's 100% free, no registration required.

We recently got a machine set up in a data center. Our next step was to connect to a data provider using a cross connect. We filled a form and received a list of IPs labeled Gateway, Network Interface etc and were informed that the cross connects were successful. We are software engineers and currently we do not know how to set up this cross connect. We are connecting to our main server using a remote desktop software and would like to cross connect the data provider for which a physical cross connect has been setup.

Thanks,

Aziz

share|improve this question
    
You should hire a consultant to work this out for you. –  SpacemanSpiff May 16 '12 at 18:36
    
Thanks Spaceman. Unfortunately, this had not been taken into account while allocating project budget at the start of the project..so I'm afraid thats not a real possibility :( –  Aziz May 16 '12 at 18:49
    
Wow. That totally and utterly sucks. Time to have a word with the project manager. –  tombull89 May 16 '12 at 19:52

1 Answer 1

Start with referring to What does "cross connect" means in Datacenters?

I assume your network interface is the address that you should assign the interface attached to the cross connect wire. Your gateway is the router that is attached to the other end of that wire and feeds into the rest of the network that comes from the cross connect.

Depending on the network setup, you may want to make that a default gateway address or involve some sort of fancier routing.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.