Note: This is my first question on the stack exchange network so please give mercy and provide guidance where needed.
I have installed a CentOS 6.2 KVM guest and I am having problem getting yum to work. This is my first time working with CentOS so I feel that it's a setting somewhere that I am missing but cannot find using google.
Here are my steps;
- Downloaded CentOS-6.2-x86_64-minimal.iso, booted, and went through default steps (only questions asked where keyboard, timezone, root password and use entire hdd)
- Restarted, logged in, pinged google.com to no avail
- Set the following settings;
nameserver 184.108.40.206 nameserver 220.127.116.11
DEVICE="eth0" HWADDR="52:54:00:42:1B:4A" #NM_CONTROLLED="yes" BOOTPROTO=none ONBOOT="yes" NETMASK=255.255.255.0 IPADDR=192.168.122.151 TYPE=Ethernet
NETWORKING=yes NETWORKING_IPV6=no HOSTNAME=server3.example.com GATEWAY=192.168.122.1
- I can now ping google.com
PING google.com (18.104.22.168) 56(84) bytes of data. 64 bytes from fa-in-f139.1e100.net (22.214.171.124): icmp_seq=1 ttl=50 time=5.88 ms 64 bytes from fa-in-f139.1e100.net (126.96.36.199): icmp_seq=2 ttl=50 time=5.77 ms
- But I cannot 'yum update'
Loaded plugins: fastestmirror, presto Loading mirror speeds from cached hostfile Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=6&arch=x86_64&repo=os error was 14: PYCURL ERROR 7 - "Failed to connect to 2a01:c0:2:4:216:3eff:fe0d:266d: Network is unreachable" Error: Cannot find a valid baseurl for repo: base
My KVM guest is also NAT'd incase it's of concern.