Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

Hei guys,

my sheevaplug embedded server works fine, but when I wanted to use USB, the device gets not attached to /dev/tty/USB0

lsusb shows correctly:

Bus 001 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port

an modprobe usbserial raises: FATAL: Could not load /lib/modules/3.3.3/modules.dep: No such file or directory

in the /lib/modules/ Folder there is instead a 2.6.36-Folder

uname -r gives 3.3.3

How can I overcome this mismatch?

Can I create a symlink?

I can't flash this embedded device since it is deployed somewhere, only ssh?

Please advise!

share|improve this question
add comment

1 Answer

first I copied the System.map to /boot

then executed depmod -eF /boot/sheeva-3.3.3-System.map 3.3.3

Since the 3.3.3 folder was missing the kernel folder thus the drivers, the Modules.tar.gz laid already from in my /root dir.

tar x -C / --overwrite -zf sheeva-3.3.3-Modules.tar.gz put them in the right directory and a reboot solved the problem.

All thanks to BigBear from the newIT UK forum everything worked as it should.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.