2

I have created ubuntu vm on centos 5.7 server using virtualbox. There is not any issue of connecting remote desktop. But my problem is I cant figure out how to setup connection between host and guest os so that guest os(Ubuntu 10.04 server) can access internet of host os (centos 5.7).

Below is my few commands output.

VBoxManage showvminfo "Ubuntu 10.04.4.1 Server" --details

Name:            Ubuntu 10.04.4.1 Server
Guest OS:        Other/Unknown
UUID:            bf9f83a7-80c8-4e23-b0ad-06d82bf81f95
Config file:     /root/VirtualBox VMs/Ubuntu 10.04.4.1 Server/Ubuntu 10.04.4.1 S                                           

                                            erver.vbox
Snapshot folder: /root/VirtualBox VMs/Ubuntu 10.04.4.1 Server/Snapshots
Log folder:      /root/VirtualBox VMs/Ubuntu 10.04.4.1 Server/Logs
Hardware UUID:   bf9f83a7-80c8-4e23-b0ad-06d82bf81f95
Memory size:     2048MB
Page Fusion:     off
VRAM size:       8MB
CPU exec cap:    100%
HPET:            off
Chipset:         piix3
Firmware:        BIOS
Number of CPUs:  1
Synthetic Cpu:   off
CPUID overrides: None
Boot menu mode:  message and menu
Boot Device (1): Floppy
Boot Device (2): DVD
Boot Device (3): HardDisk
Boot Device (4): Not Assigned
ACPI:            on
IOAPIC:          off
PAE:             on
Time offset:     0 ms
RTC:             local time
Hardw. virt.ext: on
Hardw. virt.ext exclusive: on
Nested Paging:   on
Large Pages:     off
VT-x VPID:       on
State:           running (since 2012-06-28T13:12:03.578000000)
Monitor count:   1
3D Acceleration: off
2D Video Acceleration: off
Teleporter Enabled: off
Teleporter Port: 0
Teleporter Address:
Teleporter Password:
Storage Controller Name (0):            SATA Controller
Storage Controller Type (0):            IntelAhci
Storage Controller Instance Number (0): 0
Storage Controller Max Port Count (0):  30
Storage Controller Port Count (0):      30
Storage Controller Bootable (0):        on
Storage Controller Name (1):            IDE Controller
Storage Controller Type (1):            PIIX4
Storage Controller Instance Number (1): 0
Storage Controller Max Port Count (1):  2
Storage Controller Port Count (1):      2
Storage Controller Bootable (1):        on
SATA Controller (0, 0): /root/Ubuntu_10_04_4_1_Server.vdi (UUID: a5211900-c9f8-4                                           

                                            ee8-b396-8ffe9ada43ba)
IDE Controller (1, 0): Empty
NIC 1:           MAC: 080027C57C53, Attachment: Bridged Interface 'eth0', Cable                                            

                                            connected: on, Trace: off (file: none), Type: Am79C973, Reported speed: 0 

Mbps,                                                                                        Boot priority: 0, Promisc 

Policy: deny
NIC 2:           disabled
NIC 3:           disabled
NIC 4:           disabled
NIC 5:           disabled
NIC 6:           disabled
NIC 7:           disabled
NIC 8:           disabled
Pointing Device: PS/2 Mouse
Keyboard Device: PS/2 Keyboard
UART 1:          disabled
UART 2:          disabled
Audio:           disabled
Clipboard Mode:  Bidirectional
Video mode:      640x480x0
VRDE:            enabled (Address 0.0.0.0, Ports 3390, MultiConn: on, ReuseSingl                                           

                                            eConn: off, Authentication type: null)
VRDE port:       3390
Video redirection: disabled
VRDE property: TCP/Ports  = "3390"
VRDE property: TCP/Address = <not set>
VRDE property: VideoChannel/Enabled = <not set>
VRDE property: VideoChannel/Quality = <not set>
VRDE property: VideoChannel/DownscaleProtection = <not set>
VRDE property: Client/DisableDisplay = <not set>
VRDE property: Client/DisableInput = <not set>
VRDE property: Client/DisableAudio = <not set>
VRDE property: Client/DisableUSB = <not set>
VRDE property: Client/DisableClipboard = <not set>
VRDE property: Client/DisableUpstreamAudio = <not set>
VRDE property: H3DRedirect/Enabled = <not set>
VRDE property: Security/Method = <not set>
VRDE property: Security/ServerCertificate = <not set>
VRDE property: Security/ServerPrivateKey = <not set>
VRDE property: Security/CACertificate = <not set>
VRDE property: Audio/RateCorrectionMode = <not set>
USB:             disabled

USB Device Filters:

<none>

Available remote USB devices:

<none>

Currently Attached USB Devices:

<none>

Shared folders:  <none>

VRDE Connection:    active
Clients so far:     4
Start time:         2012/06/28 15:11:51 UTC
Sent:               2766202 Bytes
Average speed:      -1579784 B/s
Sent total:         66513170 Bytes
Received:           49059 Bytes
Speed:              -28017 B/s
Received total:     102689 Bytes
User name:
Domain:
Client name:        KAMALJOSHI
Client IP:          192.168.1.64
Client version:     7600
Encryption:         RDP4

Guest:

Configured memory balloon size:      0 MB
OS type:                             Other
Additions run level:                 0

Guest Facilities:

Facility "Seamless Mode": not active (last update: 2012/06/28 13:33:45 UTC)
Facility "Graphics Mode": active/running (last update: 2012/06/28 13:33:45 UTC)

VBoxManage list hostonlyifs

Name:            vboxnet0
GUID:            786f6276-656e-4074-8000-0a0027000000
Dhcp:            Disabled
IPAddress:       192.168.23.100
NetworkMask:     255.255.255.0
IPV6Address:     fe80:0000:0000:0000:0800:27ff:fe00:0000
IPV6NetworkMaskPrefixLength: 64
HardwareAddress: 0a:00:27:00:00:00
MediumType:      Ethernet
Status:          Up
VBoxNetworkName: HostInterfaceNetworking-vboxnet0

VBoxManage list bridgedifs

Name:            eth0
GUID:            30687465-0000-4000-8000-80ee7332935e
Dhcp:            Disabled
IPAddress:       173.201.33.100
NetworkMask:     255.255.255.0
IPV6Address:     fe80:0000:0000:0000:82ee:73ff:fe32:935e
IPV6NetworkMaskPrefixLength: 64
HardwareAddress: 80:ee:73:32:93:5e
MediumType:      Ethernet
Status:          Up
VBoxNetworkName: HostInterfaceNetworking-eth0

ifconfig -a (ON Host)

eth0      Link encap:Ethernet  HWaddr 80:EE:73:32:93:5E
          inet addr:173.201.33.100  Bcast:173.201.33.255  Mask:255.255.255.0
          inet6 addr: fe80::82ee:73ff:fe32:935e/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3405846 errors:0 dropped:0 overruns:0 frame:0
          TX packets:443817 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:578723148 (551.9 MiB)  TX bytes:293187427 (279.6 MiB)
          Interrupt:82 Base address:0x8000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:119430 errors:0 dropped:0 overruns:0 frame:0
          TX packets:119430 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:25806194 (24.6 MiB)  TX bytes:25806194 (24.6 MiB)

sit0      Link encap:IPv6-in-IPv4
          NOARP  MTU:1480  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

vboxnet0  Link encap:Ethernet  HWaddr 0A:00:27:00:00:00
          inet addr:192.168.23.100  Bcast:192.168.23.255  Mask:255.255.255.0
          inet6 addr: fe80::800:27ff:fe00:0/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:29 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:6154 (6.0 KiB)

ifconfig -a (guest os)

enter image description here

lspci (guest os)

enter image description here

sudo lshw -class network (guest os)

enter image description here

Please let me know what I need to do?

TIA

2
  • Possible duplicate of serverfault.com/q/225155/105200 Jun 29, 2012 at 11:43
  • Thanks @AbhijeetKasurde but I have already read that question but I am not clear with that as I have two linux os. Even I am not having graphical interface for my centos. Jun 29, 2012 at 12:13

1 Answer 1

0

If you just want to access the internet of the host, change the virtual network adapter type for the guest from "Bridged" to "NAT". If for some reason your guest needs to be accessed from the same network as the host, you can adjust the NAT settings to forward certain ports to the guest.

From your logs it looks like your guest is not getting assigned an IP address on the bridged adapter for some reason. If you need to have a persistent connection with the guest and host, I would recommend adding a second virtual NIC set to Host-Only mode.

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .