I have a problem with the
Windows Server 2008 guest (hvm). I can't get a network interface running for him.
I also have a
Debian guest and it's working ok, but I can't do it with the
Win2k8 guest. When I started the VM, the machine freezes and I can't connect by ssh to the host.
# The loopback network interface auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 188.165.B.C netmask 255.255.255.0 network 188.165.B.0 broadcast 18.104.22.168 gateway 188.165.B.254
bridge name bridge id STP enabled interfaces eth0 8000.e840f20acc28 no peth0
... (vif-script vif-bridge) (network-script 'network-bridge') ...
# Networking # vif = [ 'ip=5.39.F.G,mac=yy:yy:yy:yy:yy:yy,type=ioemu,bridge=eth0' ]
# Networking # vif = [ 'ip=178.33.D.E,mac=xx:xx:xx:xx:xx:xx' ]
As you can see, in the
Debian guest I only have to specify an IP address and a MAC. But if I put that in the
Win2k8 guest, the machine does not start.
I am using Xen 4.0