Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I have two servers in this set up. AD and EX, the domain is called mydomain.net

  • The AD is a Windows 2008 Server (32 bit) with Active Directory installed
  • AD only has it's own ip in the DNS-servers list
  • AD.mydomain.net does resolve correctly in the dns
  • EX is a Windows 2008 R2 that is connected to the mydomain.net-domain
  • EX only DNS server is the ip of the ad.mydomain.net
  • There are no firewalls running between the two servers

When trying to install Lync 2010 on the EX server I get the following error "Not available :Failure occurred attempting to check the schema state.Please ensure Active Directory is reachable."

I can control the AD from EX, also login to it and do successful checks like

netdom query /domain:mydomain.net fsmo

...that resolves correctly

I suspect there is something fundamentally wrong with my setup, maybe Lync need a 2k8 R2 ad?

share|improve this question
    
Seems as if I made a typo, but all firewalls are down –  Eric Herlitz Jul 5 '12 at 20:43
2  
Lync requires schema extension. Have you defined a site in sites and services and associated the subnet to it? You also need to run the setup as a user with rights to perform a schema upgrade. –  SpacemanSpiff Jul 5 '12 at 20:44
    
Oh and if you plan to make Lync accessible externally you will need a third server unless you plan to use VPN. You may also run into collisions in IIS here. –  SpacemanSpiff Jul 5 '12 at 20:45
    
Where do I start with Schema extension? –  Eric Herlitz Jul 5 '12 at 21:06
add comment

2 Answers 2

up vote 1 down vote accepted

I had to obtain and run the extadsch.exe from the Microsoft System Center 2012 Configuration Manager on my Domain Controller.

share|improve this answer
    
Interesting, but I have never had to use a different product to install Lync. I sincerely hope this is a test environment. You're collocating too many functions. –  SpacemanSpiff Jul 7 '12 at 15:06
    
It is for testing and development. Im setting up a local environment since it would be to risky to develop with the production environment. –  Eric Herlitz Jul 7 '12 at 21:42
    
@Trikks Still. Ever since virtualization is around. A 32gb memory server for dev virtual machines costs nothing. –  TomTom Jan 25 '13 at 8:18
add comment

I was getting same error but I was successful to resolve this issue. Actually you are login as a local user, Please log in to server as a user which is defined in your active directory server in such a way user@domian.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.