The server is a Dell PowerEdge 2900 with two broadcom BCM5708C NetXtreme II NICs running Windows Server 2008 R2. The two NICs are teamed using BACS4. The latest version of BACS4 is installed and the latest drivers for the NICs have been installed.
There are two VLANs on that team (created with BACS4). One is the primary VLAN (VLAN 100). The other is disabled, as I'm not ready to use it quite yet (VLAN 10), which I intend to later use with hyper-v.
The switch has link aggrigation enabled for the server's two NICs. The LAG (Link Aggrigation Group) is in trunk mode and is assigned only to the primary VLAN (VLAN 100).
I can ping other computers on VLAN 100, and other computers and ping the server. I can also ping the gateway and visit the gateway device's admin interface using a browser. However, if I try to ping google.com, the address doesn't resolve (The server's DNS server is set to OpenDNS (126.96.36.199)).
The gateway device is on a switch port set to access mode and assigned to VLAN 100.
Am I missing something?