Take the 2-minute tour ×
Server Fault is a question and answer site for system and network administrators. It's 100% free, no registration required.

I'm running drbd83 with ocfs2 in centos 5 and planning to use packemaker with them. Afer some time, I'm facing drbd split brain problem.

version: 8.3.13 (api:88/proto:86-96)
GIT-hash: 83ca112086600faacab2f157bc5a9324f7bd7f77 build by mockbuild@builder10.centos.org, 2012-05-07 11:56:36

 1: cs:StandAlone ro:Primary/Unknown ds:UpToDate/DUnknown   r-----
    ns:0 nr:0 dw:112281991 dr:797551 al:99 bm:6401 lo:0 pe:0 ua:0 ap:0 ep:1 wo:b oos:60

I can't switch my drbd to secondary.

drbdadm secondary r0
1: State change failed: (-12) Device is held open by someone
Command 'drbdsetup 1 secondary' terminated with exit code 11

My drbd resource config:

resource r0 {
        syncer { 
                rate 1000M; 
                verify-alg sha1;
        }

        disk {
                on-io-error detach;
        }

        handlers {
           pri-lost-after-sb "/usr/lib/drbd/notify-split-brain.sh root";
        }

        net {
                allow-two-primaries;
                after-sb-0pri discard-younger-primary;
                after-sb-1pri call-pri-lost-after-sb;
                after-sb-2pri call-pri-lost-after-sb;
        }
        startup { become-primary-on both; }

        on serving_4130{
                device          /dev/drbd1;
                disk            /dev/sdb1;
                address         192.168.4.130:7789;
                meta-disk       internal;
        }
        on MT305-3182 {
                device          /dev/drbd1;
                disk            /dev/xvdb1;
                address         192.168.3.182:7789;
                meta-disk       internal;
        }
}

Status of ocfs2 status:

service ocfs2 status
Configured OCFS2 mountpoints:  /data

lsof show that, there is one process relative with drbd.

lsof | grep drbd
COMMAND     PID      USER   FD      TYPE             DEVICE     SIZE       NODE NAME
drbd1_wor  7782      root  cwd       DIR              253,0     4096          2 /
drbd1_wor  7782      root  rtd       DIR              253,0     4096          2 /
drbd1_wor  7782      root  txt   unknown                                        /proc/7782/exe

And it's a dead symlink:

# ls -l /proc/7782/exe
ls: cannot read symbolic link /proc/7782/exe: No such file or directory
lrwxrwxrwx 1 root root 0 May  4 09:56 /proc/7782/exe

# ps -ef | awk '$2 == "7782" { print $0 }'
root      7782     1  0 Apr22 ?        00:00:20 [drbd1_worker]

Notice that this process is wrapped in square brackets:

man ps:

args       COMMAND  command with all its arguments as a string. Modifications to the arguments may be shown. The
                    output in this column may contain spaces. A process marked <defunct> is partly dead, waiting to
                    be fully destroyed by its parent. Sometimes the process args will be unavailable; when this
                    happens, ps will instead print the executable name in brackets.

So, the final question is: how can we manually recover DRBD in this case without rebooting?


Reply to @andreask:

My partition table:

# df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
                       35G  6.9G   27G  21% /
/dev/xvda1             99M   20M   74M  22% /boot
tmpfs                 1.0G     0  1.0G   0% /dev/shm
/dev/drbd1            100G  902M  100G   1% /data

The device names:

# dmsetup ls --tree -o inverted
 (202:2)
 ├─VolGroup00-LogVol01 (253:1)
 └─VolGroup00-LogVol00 (253:0)

Pay attention to the block device (253:0), it is the same as from the output of lsof:

# lvdisplay 
  --- Logical volume ---
  LV Name                /dev/VolGroup00/LogVol00
  VG Name                VolGroup00
  LV UUID                vCd152-amVZ-GaPo-H9Zs-TIS0-KI6j-ej8kYi
  LV Write Access        read/write
  LV Status              available
  # open                 1
  LV Size                35.97 GB
  Current LE             1151
  Segments               1
  Allocation             inherit
  Read ahead sectors     auto
  - currently set to     256
  Block device           253:0

Reply to @Doug:

# vgdisplay 
  --- Volume group ---
  VG Name               VolGroup00
  System ID             
  Format                lvm2
  Metadata Areas        1
  Metadata Sequence No  3
  VG Access             read/write
  VG Status             resizable
  MAX LV                0
  Cur LV                2
  Open LV               2
  Max PV                0
  Cur PV                1
  Act PV                1
  VG Size               39.88 GB
  PE Size               32.00 MB
  Total PE              1276
  Alloc PE / Size       1276 / 39.88 GB
  Free  PE / Size       0 / 0   
  VG UUID               OTwzII-AP5H-nIbH-k2UA-H9nw-juBv-wcvmBq

UPDATE Fri May 17 16:08:16 ICT 2013

Here are some ideas from Lars Ellenberg:

if the filesystem is still mounted ... oh well. unmount it. not lazy, but really.

I'm sure, OCFS2 was already unmounted.

If nfs was involved, try

killall -9 nfsd
killall -9 lockd
echo 0 > /proc/fs/nfsd/threads

No, NFS was not involved.

if lvm/dmsetup/kpartx/multipath/udev is involved, try

dmsetup ls --tree -o inverted

and check if there are dependencies from drbd.

As you can see from my above output, LVM doesn't related to DRBD:

pvdisplay -m

  --- Physical volume ---
  PV Name               /dev/xvda2
  VG Name               VolGroup00
  PV Size               39.90 GB / not usable 20.79 MB
  Allocatable           yes (but full)
  PE Size (KByte)       32768
  Total PE              1276
  Free PE               0
  Allocated PE          1276
  PV UUID               1t4hkB-p43c-ABex-stfQ-XaRt-9H4i-51gSTD

  --- Physical Segments ---
  Physical extent 0 to 1148:
    Logical volume      /dev/VolGroup00/LogVol00
    Logical extents     0 to 1148
  Physical extent 1149 to 1275:
    Logical volume      /dev/VolGroup00/LogVol01
    Logical extents     0 to 126

fdisk -l

Disk /dev/xvda: 42.9 GB, 42949672960 bytes
255 heads, 63 sectors/track, 5221 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

    Device Boot      Start         End      Blocks   Id  System
/dev/xvda1   *           1          13      104391   83  Linux
/dev/xvda2              14        5221    41833260   8e  Linux LVM

Disk /dev/xvdb: 107.3 GB, 107374182400 bytes
255 heads, 63 sectors/track, 13054 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

    Device Boot      Start         End      Blocks   Id  System
/dev/xvdb1               1       13054   104856223+  83  Linux

if loop/cryptoloop/etc is involved, check if one of those is still accessing them.

if some virtualization tecknique is in use, shut down/destroy all containers/VMs that may have been accessing that drbd during their life time.

No, it doesn't.

Sometimes it is just udev or equivalent doing a race.

I have disabled the multipath rule and even stop the udevd, and nothing change.

Sometimes it is a unix domain socket or similar still held open (won't necessary show up in lsof/fuser).

If so, how can we find out this unix socket?


UPDATE Wed May 22 22:10:41 ICT 2013

Here is the stacktrace of DRBD worker process when dumping via magic SysRq key:

kernel: drbd1_worker  S ffff81007ae21820     0  7782      1          7795  7038 (L-TLB)
kernel:  ffff810055d89e00 0000000000000046 000573a8befba2d6 ffffffff8008e82f 
kernel:  00078d18577c6114 0000000000000009 ffff81007ae21820 ffff81007fcae040 
kernel:  00078d18577ca893 00000000000002b1 ffff81007ae21a08 000000017a590180 
kernel: Call Trace: 
kernel:  [<ffffffff8008e82f>] enqueue_task+0x41/0x56 
kernel:  [<ffffffff80063002>] thread_return+0x62/0xfe 
kernel:  [<ffffffff80064905>] __down_interruptible+0xbf/0x112 
kernel:  [<ffffffff8008ee84>] default_wake_function+0x0/0xe 
kernel:  [<ffffffff80064713>] __down_failed_interruptible+0x35/0x3a 
kernel:  [<ffffffff885d461a>] :drbd:.text.lock.drbd_worker+0x2d/0x43 
kernel:  [<ffffffff885eca37>] :drbd:drbd_thread_setup+0x127/0x1e1 
kernel:  [<ffffffff800bab82>] audit_syscall_exit+0x329/0x344 
kernel:  [<ffffffff8005dfb1>] child_rip+0xa/0x11 
kernel:  [<ffffffff885ec910>] :drbd:drbd_thread_setup+0x0/0x1e1 
kernel:  [<ffffffff8005dfa7>] child_rip+0x0/0x11 

I'm not sure if this OCFS2 heartbeat region is preventing DRBD from switching to secondary:

kernel: o2hb-C3E41CA2 S ffff810002536420     0  9251     31                3690 (L-TLB)
kernel:  ffff810004af7d20 0000000000000046 ffff810004af7d30 ffffffff80063002
kernel:  1400000004000000 000000000000000a ffff81007ec307a0 ffffffff80319b60
kernel:  000935c260ad6764 0000000000000fcd ffff81007ec30988 0000000000027e86
kernel: Call Trace:
kernel:  [<ffffffff80063002>] thread_return+0x62/0xfe
kernel:  [<ffffffff8006389f>] schedule_timeout+0x8a/0xad
kernel:  [<ffffffff8009a41d>] process_timeout+0x0/0x5
kernel:  [<ffffffff8009a97c>] msleep_interruptible+0x21/0x42
kernel:  [<ffffffff884b3b0b>] :ocfs2_nodemanager:o2hb_thread+0xd2c/0x10d6
kernel:  [<ffffffff80063002>] thread_return+0x62/0xfe
kernel:  [<ffffffff800a329f>] keventd_create_kthread+0x0/0xc4
kernel:  [<ffffffff884b2ddf>] :ocfs2_nodemanager:o2hb_thread+0x0/0x10d6
kernel:  [<ffffffff800a329f>] keventd_create_kthread+0x0/0xc4
kernel:  [<ffffffff80032632>] kthread+0xfe/0x132
kernel:  [<ffffffff8005dfb1>] child_rip+0xa/0x11
kernel:  [<ffffffff800a329f>] keventd_create_kthread+0x0/0xc4
kernel:  [<ffffffff80032534>] kthread+0x0/0x132
kernel:  [<ffffffff8005dfa7>] child_rip+0x0/0x11
share|improve this question

migrated from stackoverflow.com Jul 22 '12 at 15:14

This question came from our site for professional and enthusiast programmers.

    
This is a programming forum, read the FAQ; therefore this question would be a better fit for Superuser. Voting to close. –  t0mm13b Jul 18 '12 at 21:24
    
Did you umount ocfs before trying to demote it to secondary? –  Nils Aug 3 '12 at 21:03
    
@Nils: Yes, OCFS2 was already unmounted before trying to demote. –  quanta May 20 '13 at 2:53

2 Answers 2

up vote 3 down vote accepted

I'm not sure if this OCFS2 heartbeat region is preventing DRBD from switching to secondary:

Maybe. Have you tried to kill that region follow this guide?

# /etc/init.d/o2cb offline serving
Stopping O2CB cluster serving: Failed
Unable to stop cluster as heartbeat region still active

OK, firstly you should list the OCFS2 volumes along with their labels and uuids:

# mounted.ocfs2 -d
Device                FS     Stack  UUID                              Label
/dev/sdb1             ocfs2  o2cb   C3E41CA2BDE8477CA7FF2C796098633C  data_ocfs2
/dev/drbd1            ocfs2  o2cb   C3E41CA2BDE8477CA7FF2C796098633C  data_ocfs2

Secondly, check to see if you have any reference to this device:

# ocfs2_hb_ctl -I -d /dev/sdb1
C3E41CA2BDE8477CA7FF2C796098633C: 1 refs

Try to kill it:

# ocfs2_hb_ctl -K -d /dev/sdb1 ocfs2

then stop the cluster stack:

# /etc/init.d/o2cb stop
Stopping O2CB cluster serving: OK
Unmounting ocfs2_dlmfs filesystem: OK
Unloading module "ocfs2_dlmfs": OK
Unmounting configfs filesystem: OK
Unloading module "configfs": OK

and bring the device back into secondary role:

# drbdadm secondary r0
# drbd-overview 
  1:r0  StandAlone Secondary/Unknown UpToDate/DUnknown r----- 

Now you can recover split brain as usual:

# drbdadm -- --discard-my-data connect r0
# drbd-overview 
  1:r0  WFConnection Secondary/Unknown UpToDate/DUnknown C r----- 

On the other node (the split brain survivor):

# drbdadm connect r0
# drbd-overview                                                                                                
  1:r0  SyncSource Primary/Secondary UpToDate/Inconsistent C r---- /data ocfs2 100G 1.9G 99G 2% 
        [>....................] sync'ed:  3.2% (753892/775004)K delay_probe: 28

On the split brain victim:

# /etc/init.d/o2cb start
Loading filesystem "configfs": OK
Mounting configfs filesystem at /sys/kernel/config: OK
Loading filesystem "ocfs2_dlmfs": OK
Mounting ocfs2_dlmfs filesystem at /dlm: OK
Starting O2CB cluster serving: OK

# /etc/init.d/ocfs2 start
Starting Oracle Cluster File System (OCFS2)                [  OK  ]

Verify that this mount point is up and running:

# df -h /data/
Filesystem            Size  Used Avail Use% Mounted on
/dev/drbd1            100G  1.9G   99G   2% /data
share|improve this answer
    
Great work! You save me from frustration with DRBD. The problem is solved after nearly one year long. Thank you! –  favadi May 22 '13 at 16:29

A common reason for DRBD being unable to demote a resource is an active device-mapper device ... like a volume group. You can check it e.g. with:

dmsetup ls --tree -o inverted
share|improve this answer
1  
dmsetup ls --tree -o inverted (8:2) ├─VolGroup00-LogVol01 (253:1) └─VolGroup00-LogVol00 (253:0) So how can I deal with this? –  favadi Jul 28 '12 at 4:03
    
Either just remove it from device mapper or deactivate the volume group (vgchange -an volume_group). –  Doug Jul 30 '12 at 10:27
    
DRBD doesn't use Logical Volume as a backing device. –  quanta Aug 4 '12 at 3:49
    
and if it's dangling device, you can remove the device with dmsetup remove. –  Igor Galić May 1 '13 at 9:30

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.