I have a Cisco RV110W small office router (this configuration process is common to many Linksys/Cisco routers) and I am trying to define QuickVPN clients. When add a client of type "QuickVPN" the router gives me the following warning:
(You can find a larger version of the screenshot here
"WARNING: In order to ensure proper functionality, the router will need to change its IP address to 10.x.x.1 to avoid conflicts with the remote network. You will need to reboot all PCs and network devices connected to the router. If you have set static IP addresses on any device or if you are using port forwarding, you will need to update its IP address to the new IP range to operate properly. Would you like to continue?"
My internal subnet is 192.168.1.0/255.255.255.0. I don't understand the warning message since a 10.x.x.1 network can just as easily conflict with a remote network as a 192.168.1.x network can.
How shoud I proceed?