Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I have a hub-spoke vpn setup between different locations,

Hub: 10.10.10.0/24 
A: 192.168.2.0/24
B: 192.168.41.0/24 

There is ipsec vpn tunnel between Hub-A, and Hub-B, and the connection is fine. However, I can't ping B from A. The connection needs to go through Hub. I'm wondering what settings need to be made for the connection to work?

I tried to use NAT to translate A's address into Hub's but doesn't work.

share|improve this question
1  
Are you using IOS router or ASA? –  Bad Dos Aug 9 '12 at 14:31
    
i'm using IOS. basically I can see A&B from Hub, can see Hub from A, but not B from A. –  Daniel Aug 9 '12 at 21:41
    
it's solved, turns out to be nat rules issue. –  Daniel Aug 10 '12 at 12:23
    
@Daniel you should post what you did to fix it. –  evolvd Apr 9 '13 at 21:52

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Browse other questions tagged or ask your own question.