Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

The configuration is as follows:

13 x 450G disks on RAID5 with 1 hot spare.

There 2 more disks but configured as RAID1.

Is it possible to upgrade the hard disks without downtime or data loss?

share|improve this question

1 Answer 1

up vote 1 down vote accepted

Looks like only M1115 supports hot swap and M5015 does not.

www.redbooks.ibm.com/abstracts/tips0054.html

share|improve this answer
    
What will happen if I change the hot spare with a bigger hard disk? –  pl1nk Aug 20 '12 at 11:46
    
What is it that you are trying to achieve by replacing the hot spare with a larger drive? Are ok doing this offline since your RAID controller does not support hot swap. Your RAID may not allow expanding one drive with a larger capacity since they expect them to be of equal capacity. –  Chida Aug 20 '12 at 11:59
    
Updating the capacity of the SAN without downtime. Is it possible to do this with an expansion unit? –  pl1nk Aug 20 '12 at 12:02
    
If this is your SAN then I strongly recommend you spek to IBM support and seek advice. This controller supports 32 SATA/SAS drives. You may also add an expansion unit but I'm unsure if you can do this without downtime. –  Chida Aug 20 '12 at 12:38

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.