2

I have read this question and have been googling trying to do what is in the title, with no luck. I´ve tried bridging connections, ICS, etc.

I have two separate internet connections from two different companies at my disposal. I have got the NLB in Windows 7 working using these two connections. The computer I am using for this task has two NICs and one wifi card. I´ve used the wifi card and a NIC for the NLB and works well, as well as using the two NICS for the NLB.

But now I need to share this NLB connection in my home network. Is this possible to do using only Windows 7 or what can the experts recommend?

Alternately, should I be looking at another OS?

Thank you all for your help

1 Answer 1

1

You should get an appliance like a router or L3 switch that can load-balance connections across multiple uplinks. Trying to do this on Windows 7 is not a great idea. It wasn't designed to act as a router, nevermind one that load balances multiple WAN uplinks.

6
  • Thanks for your thoughts MDMarra, however without getting into additional hardware, is there any 3rd party software that could help me achieve this?
    – Andrew M.
    Aug 22, 2012 at 16:29
  • 1
    You can probably do this with an OS that's more suited for work as a router, like one of the BSDs or Linux. Over the long-haul, the electricity required to run a full-blown desktop will more than overcome buying a dedicated piece of hardware, though.
    – MDMarra
    Aug 22, 2012 at 16:30
  • Just want to make sure it can´t be done with Windows 7?, since the Desktop I have already has it installed. Then I will try Linux, any recommendations? And thanks again
    – Andrew M.
    Aug 22, 2012 at 16:32
  • This is a site for professionals. No professional is ever going to try and configure this in their environment using Windows 7. It's a desktop OS. It was never intended to do routing, the little functionality that is there was bolted on as an afterthought. If you want any kind of reliability (which is the cornerstone of being a professional) you'll use an OS that has this built-in, like one of the BSDs, or you'll buy a multi-uplink router than can aggregate or round-robin the connections.
    – MDMarra
    Aug 22, 2012 at 16:40
  • @Andrew It can't be done with Win7 without 3rd party software. pfSense can do this out of the box and it's pretty easy to configure (nice web interface).
    – Chris S
    Aug 22, 2012 at 16:40

Not the answer you're looking for? Browse other questions tagged .