Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I am looking for a way I could combine two 100Mbit fiber optic lines into a single connection for our office. I assume it involves some Cisco learning or something similar.

Do I need to configure some big router to load-balance the NATing in some way?

I assume that many of you have done something similar and hope someone could share their knowledge or at least provide me some tips on how to do this.

share|improve this question
    
I still don't understand. Are these coming from the same provider? What is your goal? –  ewwhite Sep 13 '12 at 11:57
    
Yes. Those two are coming from the same provider. One line = 100Mbp. And I got two of them. I want to have 200Mbp in total. –  Katafalkas Sep 13 '12 at 12:25
    
Can you ask the provider for a higher-bandwidth connection? –  ewwhite Sep 13 '12 at 12:38
add comment

2 Answers

up vote 17 down vote accepted

Depending on the technology you are employing, there may be many ways to achieve what you are trying to do:

  • if your fiber links are Ethernet links and you can control the configuration of switches at both ends of the link, you may use 802.3ad link aggregation (also known as Trunking or Fast Etherchannel) to transparently aggregate at Layer 2
  • if you are working with some kind of Internet Service Provider and your links are employing PPP as the encapsulation protocol, MPPP or Multilink PPP would do something rather similar at an encapsulation layer
  • if no Layer 2 option is available, multipath routing might be an option
    • either with the help of routing protocols as done for BGP multipath load sharing
    • or with some additional routing logic as described in the LARTC howto using a feature implemented in Linux, but in no ways unique to it

The whole task would of course involve "Cisco learning" if the device you have is a Cisco router, but other router vendors would provide this kind of feature set as well.

share|improve this answer
add comment

Are these lines coming from the same provider? What is your goal? Is it resiliency or performance?

If it's performance and a single provider, lobby for a higher-bandwidth link from the provider (on a GigE port).

If these are diverse links, I think the path of least resistance is to use of a link balancer unit. This was covered recently in: Load balancing with Cisco router

But the idea is that you use an external appliance that interfaces with your two (or more) ISP handoffs. I use the example of the Elfiq link balancer, which can aggregate the bandwidth of multiple ISP's and load balance traffic using a variety of algorithms. Other offerings by Barracuda, Peplink, etc. are as capable. If a link goes down, the other available lines will take over. It's transparent to your users.

For inbound services, balancing is either done by DNS or with the protocol's atributes (e.g. multiple MX records for mail).

In the Elfiq case, you would still use a single firewall behind the device to handle NAT translation. Your firewall config does not have to change. You can insert this load balancer into your environment without any disruption.

Screenie of load balancer interface

share|improve this answer
2  
+1 for Elfiq, you could also consider Peplink which does Link Aggregation with Authoritative DNS service to automatically switch external facing services in the event one of the lines goes down, this includes VPN connections. –  Brent Pabst Sep 12 '12 at 12:16
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.