Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

Does a Supermicro x8SAX support SAS drives? I looked through the manual but am not seeing where this is mentioned. I want to set up on board raid 1

share|improve this question
add comment

1 Answer

Did you not come across this page during your searches (the first result when you Google for the motherboard type)?

Serial ATA

6 Serial ATA ports
6 SATA hard drives supported

No mention of SAS support - there doesn't appear to be a SAS controller onboard.

Just because there's no SAS support doesn't mean you can't have RAID - the ICH10R controller supports RAID. Just use SATA drives.

share|improve this answer
    
Ok, I did come across that page and I didn't see any mention of SAS so I just want to confirm. I am still learning and I want to confirm something here. By using a SAS controller I should be able to use the SATA ports on this board and do my raid 1 set up right? Please confirm –  Marlin Sep 18 '12 at 11:56
    
Your question doesn't make sense. The ICH10R SATA controller that is on board is already capable of RAID. You don't need a SAS controller. All you need are some SATA drives. –  Chris McKeown Sep 18 '12 at 12:01
    
Thanks I will try it like that. –  Marlin Sep 18 '12 at 12:05
    
No problem. You might need to enable the RAID BIOS in the BIOS setup of your board. Check the manual for details of this. –  Chris McKeown Sep 18 '12 at 12:08
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.