We have 8 300GB SAS drives in a RAID5 + Spare configuration. It seems data capacity planning came up a bit short and I need more disk space. Instead of replacing drives with 600 GB models, I would like to take the Spare drive and add back to the array. Is this posible with the HP ACU without reconfiguring the entire awway and losing data?
Yes... This is possible. So you're saying you have 7 disks in the RAID 5 set, and want to take disk #8, which is currently a spare, and move it to become the 8th member of the RAID 5 array?
If you have the HP Array Configuration Utility (HP ACU) installed, this is very easy. There is a web-based GUI and a command-line option to handle this change. It can even be done online without taking the server down, as long as the right things are in place.
We would need to know the server model, controller type, cache configuration and operating system to be able to give specific details/actions.
A generic CLI setup using the hpacucli utility:
In this case, I could remove the spare with:
I could then add the now unassigned disk,
The difference is that the first would add to the existing RAID 1+0 logical drive (which doesn't make sense since it's an odd-number of drives). The second would result in the array being larger and would give that array 146GB of "unused space", which could then be carved into another logical drive.
You can have different RAID levels on HP logical drives contained on the same group of disks!
In your case, the first command would just expand your RAID 5 array. In Windows, the space would become available. In Linux, it depends...
Edit: The OS is VMWare ESXi 5...
Your options are to run this from the bootable HP SmartStart CD using the GUI or you can install the HP ESXi bundles (here and here) for ESXi and get a usable