Take the 2-minute tour ×
Server Fault is a question and answer site for system and network administrators. It's 100% free, no registration required.

Here is my config:

  • Supermicro X7DBU;
  • 3ware 9650 RAID Controller - driver installed, I use it as main datastore;
  • managing the hypervisor with VMware vSphere Client 5.0.0 on Windows 2003 Server;

I have read that under the Configuration Tab on the client, Under Health Status, I should be able to see more hardware information than is displayed on the screenshot below.

VMware Configuration tab screnshot

What I want is very simple - a way to monitor the hardware status of the server as well as the RAID array state. Now, I have no way to know if a drive has failed, if the temperature is high, etc. I managed to install 3ware RAID CLI (tw_cli) and possibly this would help, but it solves the problem only partially.

The best solution should be a free one, as I have only this server and no money to spend on it.

How I can approach this?

share|improve this question
    
The ammount of information that is showed is highly dependent on you buying/having hardware that is explicitly supported by Vmware. –  Zoredache Sep 26 '12 at 16:29

1 Answer 1

up vote 5 down vote accepted

I think you're out of luck. Normally the vendor would provide a CIM driver (or it's there by default for IBM, Dell, etc.) to enable hardware monitoring, but according to Supermicro's FAQ, they're not planning on releasing one.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.