Take the 2-minute tour ×
Server Fault is a question and answer site for system and network administrators. It's 100% free, no registration required.

I have Linux server and I have a spare 500GB disk partition. I wanted to format it and use it for /tmp. The server occasionally runs some large data processing tasks so it can happen that /tmp will hold GBs of temporary data.

Then I got an idea that instead I could add it as a swap partition instead and mount /tmp to tmpfs. Is this idea reasonable?

The server has 6GB of RAM, so in most cases data on /tmp would be only in RAM, with the obvious speed advantage. The question is, what if there will be let's say 10-20GB of data on /tmp, how will the system perform? What would be the performance compared to having simply /tmp mounted to an ext4 partition? Thanks for help.

Edit: It is clear that the system will start swapping out memory when the usage of tmpfs hits the RAM limit. But is Linux smart enough to swap out tmpfs data and keep "regular" data in RAM? If yes, then I suppose it could behave reasonably. If not, then the whole system will be severely affected.

share|improve this question

1 Answer 1

up vote 8 down vote accepted

This is NOT A Good IdeaTM.

You'll be fine with a large /tmp partition, mounted like this (from your /etc/fstab)

tmpfs  /dev/tmp  tmpfs  defaults,nosuid,nodev,noexec,noatime,nodiratime,size=6000M 0 0

And you could add your external drive as a giant swap partition

/dev/sdb1  swap  swap  defaults  0 0

When that hits its limit, your machine will start to swap the pages from RAM to disk - at which point, load averages will go through the roof and the machine will grind to a halt.

Its a bad idea to rely on SWAP in any way, you'd be better off selling your 500GB drive and simply buying more RAM - its cheap.

In summary

If you really want to use your 500GB disk, you could mount your 500GB disk on /tmp with a non-journaled filesystem with atime and diratime disabled (eg. ext2). That would be substantially faster than dealing with a machine that is SWAPing

share|improve this answer
    
This is a TERRIBLE idea. Using tmpfs and relying on it to be pushed to swap sounds like an idea... but the reality is that your system may push the wrong things to swap in-favor of keeping tmpfs in physical RAM. You'd be better off simply mounting your 500gb partition to /tmp and be done with it. I'd suggest using an extremely light-weight file-system like xfs of riserfs... as you can quickly re-format it on startup or whenever the need arises... and you really don't need all the advanced features of ext2/3/4 and such. –  TheCompWiz Sep 27 '12 at 14:05
1  
Why the downvote? I wasn't condoning this action - but providing a means on how to do it. The question was whether it was possible and how to go about it - not whether it was a good idea or not. I had explicitly stated that this is A Bad Idea - and that the actual solution should just be to buy more RAM if he needs faster tmp access. –  Fran Sep 27 '12 at 14:15
    
This is a place for good ideas... not duct-tape & bubble-gum solutions. People come here for help... and not for ideas on how to make their lives hell. –  TheCompWiz Sep 27 '12 at 14:20
    
I edited my answer to suit your comment, thanks for your input –  Fran Sep 27 '12 at 14:25
    
@TheCompWiz I wasn't really asking how to do it, I was asking if it was a good idea or not (which you have answered in your comments). –  Petr Pudlák Sep 27 '12 at 14:49

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.