Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I have some SIP phones on one network that go through an IPIP tunnel to get to the server.

I've setup QOS rules to watch for appropriate VOIP traffic as follows:

class-map match-any class-voice
  description Voice
  match  dscp af11
  match  dscp cs4 
  match  dscp cs3 
!
policy-map qos-out
  class class-voice
   priority 100
!
interface Tunnel1
 description Tunnel to VOIP Server
 ip address 10.10.0.2 255.255.255.252
 tunnel source FastEthernet0/1
 tunnel destination 172.16.100.100
 tunnel mode ipip
!
interface FastEthernet0/1
 description Internet
 bandwidth 1000
 ip address dhcp
 service-policy output qos-out

My trouble is that the class-map isn't getting matched because I can't assign the policy to the Tunnel1, only FastEthernet0/1.

Surely there must be something to make this work... what should I do?

share|improve this question

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Browse other questions tagged or ask your own question.