Sign up ×
Server Fault is a question and answer site for system and network administrators. It's 100% free, no registration required.

SPF (Sender Policy Framework) seems like a good way to combat spammers/spoofing.

However, despite reading the explanations several times, I'm not quite understanding how to configure it correctly.

Let's say I have my server at which hosts and and and so on.

I also have and so on, each of these with an assortment of sub-domains, all hosted on

For all of these domains and sub-domains, I want to permit mail to be sent from

I would also like them all to permit mail sent from Gmail for all these domains.

How do I set this up with SPF?

Can I set one SPF record for (or and then for everything else just have a simple include/pointer to's record, or would it need to be done differently?

Can anyone provide some SPF records for the above example?

Note: The second part of my question has been answered (use "v=spf1 -all" to include/point at's record), but the key part of what to set on remains unanswered...

share|improve this question
Actually it's proved a hopelessly ineffective way of reducing spam. In fact, arguably, it's only really meant to address sender address spoofing anyway. – Christopher Edwards May 5 '09 at 0:57
"it's only really meant to address sender address spoofing" - exactly, to stop spammers from sending mail appearing to come from others' domains. – Peter Boughton May 5 '09 at 7:47

5 Answers 5

up vote 6 down vote accepted

You can't avoid having to alter the zone files for the domains other than, but you can save yourself a lot of trouble by defining common policies hosted on one domain and using the redirect SPF keyword on the other domains. Example:

  • In the zonefile for the domain:
_policy1    IN    TXT     "v=spf1 -all"
_policy2    IN    TXT     "v=spf1 -all" is the record holding the Gmail SPF record. Not sure whether it's documented. Theoretically you should but that's a redirect to and there has been at least one widely used SPF patch for qmail which didn't follow it properly (got fixed in August 2008 but might still be deployed.) The two policies are examples, of course - having more than one with various levels of strictness is extremely useful when debugging since you only have to alter a short name in the target domain instead of error-prone copypasting.

  • In the zonefiles for the other domains:
@                       IN    TXT    "v=spf1"


@                       IN    TXT    "v=spf1"

etc. I'm using redirect, not include, to cause the SPF check to completely replace the currently evaluated record with the one I'm redirecting to. include does not do that - for example, an -all at the end of an include does not cause evaluation to stop (include is a big misnomer.) You should avoid using include when you want to "alias" a SPF record from another domain, since it's quite brittle - if you accidentally forget the trailing -all you might render your entire SPF on that domain ineffective.

Edit: Please note, though, that you need to be on guard if you want to allow Gmail's servers as senders. The Gmail chaptcha has been cracked, which means that it's possible to automate account signups, which means Gmail can be (indirectly) used as an open relay (I'm getting tens of spambot signup requests per week for my company discussion forum, all using email addresses - and those addresses are live, I've allowed a few to go through for checking purposes.) Additionally, anyone with a Gmail account can bypass SPF checking if familiar with the uwsername parts of the email addresses at your domains.

share|improve this answer
Thanks, this is a helpful answer. Last time I checked, Gmail requires email validation before you can send emails from other addresses - so once the inbox for that address is secure, things are ok? How important is/isn't also having 'www' lines as in bortzmeyer's answer? – Peter Boughton May 9 '09 at 15:11
True, but once a crack appears in the foudation I'm sure someone will find a way to squeeze half the river through :) Not saying you shouldn't, I'm just recommending to be on your toes and periodically check whether Gmail is being exploited, i.e. please don't abandon authority to Gmail indefinitely. I trust them more than I trust more online entities, but that's just a little trust versus no trust at all. – Mihai Limbăşan May 9 '09 at 18:47
I have no idea why bortzmeyer included the www entries. They are entirely useless unless you actually send mail from which (apart from not being used much) looks plain weird and induces confusion in less than technically savvy people. – Mihai Limbăşan May 9 '09 at 18:48
Additionally, I would NOT use SPF record types. I recommend you stick with TXT. The SPF record type is only supported by BIND 9.4 and higher, per RFC you must also maintain replicas of the TXT records i.e. you must copypaste stuff (bad) and you must maintain them in sync (hard). The gain is nonexistent since TXT will be the primary SPF delivery mechanism for the foreseeable future, quoth – Mihai Limbăşan May 9 '09 at 18:50
@Mihai Limbasan: excellent answer, thanks for sharing. In case you think it's necessary to update your answer, Google seems to prefer v=spf1 ~all in place of -all, supposing I understood properly, ref. – Marco Demaio Jul 22 '11 at 16:59

The standard, RFC 4408, provides some examples that are very close from what you want. Here is an extract of's zonefile:

@     IN TXT  "v=spf1 -all"
      IN SPF  "v=spf1 -all"

www   IN TXT  "v=spf1 -all"
      IN SPF  "v=spf1 -all"


  • I did not add Gmail email servers because I do not know them, ask Gmail people
  • 'a' is for 'address' (it is not a DNS A record, it includes IPv6)
  • I added SPF records, per the RFC, although almost all implementations use only the TXT record
share|improve this answer

Yes, you can include the config from one of your domains in the SPF records for all the other domains. Setting the other domains' SPF record to the following should do the trick:

v=spf1 -all
share|improve this answer
Will this "just work", or does it require a _spf sub-domain, or similar? – Peter Boughton May 5 '09 at 19:51
I'm pretty sure that if you've got the SPF records defined directly on initially, the include for the other domains can just point directly at as well. If you define your SPF record in route, then yeah, you'll need to change the include a bit to point to that FQDN as well. – womble May 6 '09 at 0:14

Yes, you need to add the specific SPF record to each domain individually.

The reason for this is that the only (useful) aliasing type record in the DNS is the CNAME record. However the CNAME record causes aliasing to happen for ALL of the RRtypes in an RRset - there's no way to say "CNAME the SPF record but not the MX records"

share|improve this answer
I understand that I'll have to add a SPF record for each domain, but I was hoping to simply store a simple pointer to the main domain, where all the more complex commands can then live. Womble suggests I can use the include:{domain} for this, but I'm still unclear if this simply includes/points at the SPF records for the other domain, or if I need to host a subdomain? – Peter Boughton May 5 '09 at 19:50
yes, see womble's answer – Alnitak May 5 '09 at 20:02

Have you tried using the web tool at It might make it a bit easier for you to deal with this...

Just enter your domain in the top-right box and click the go button. From there, you should be able to set things up in a hurry.

share|improve this answer
I've tried several times with that tool, but the explanations are not clear enough. – Peter Boughton May 4 '09 at 22:35

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.