Server Fault is a question and answer site for system and network administrators. It's 100% free, no registration required.

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I'm currently trying to get my head around more advanced networking concepts. The way I am doing this is by going on one of the servers I look after as a sysadmin and running network captures to see and make sense of the data. (The machine I am running this capture on is serveriamon.networkname.local with an IP of

This lead me to this exchange on the network:

1127    11:46:55 12/10/2012 30.2960887
serveriamon.networkname.local   ARP ARP:Request, asks for    

1128    11:46:55 12/10/2012 30.2961939      serveriamon.networkname.local ARP ARP:Response, at 78-2B-CB-23-8D-07   

I can understand this exchange. The Machine at wants to find out where and what the MAC is for The server at that address (this server) replies with its ARP response containing the Mac address.

Immediately afterwards this frame then occurs:

1129    11:46:55 12/10/2012 30.2964210 serveriamon.networkname.local   SNTP    SNTP:NTPv3 Request, Leap = 0, Mode = 3, RID = 5154  {SNTP:377, UDP:376, IPv4:375}

This I understand is a request for the time on the server. That's fine. The next frame is what is confusing me:

1130    11:46:55 12/10/2012 30.2972641      serveriamon.networkname.local ARP ARP:Request, asks for    

Embedded in frame 1129 in the SNTP request is the source address. Why is the server then immediately doing a broadcast to find out where the IP address is?

I suspect I am just misunderstanding how this works but I am genuinely intrigued. It seems "wasteful" and "noisy" to put out an ARP when it should already have the information?

share|improve this question
up vote 3 down vote accepted

This is an interesting observation that I have never noticed before. This behavior suggests that the server isn't putting the Hardware address into its arp table when it gets arp requests. What type of operating system is this?

The original ARP RFC 826 does talk about this a little bit with regards to a "Merge flag":

"Notice that the triplet is merged into the table before the opcode is looked at. This is on the assumption that communcation is bidirectional; if A has some reason to talk to B, then B will probably have some reason to talk to A."

I'm having trouble finding more information about the merge flag though.

A guess as to the reason for this behavior:
One reason I guess you might do this is to prevent someone from overflowing your arp cache. In other words "To be safe, I'm only going to cache this if I asked for it".

Otherwise, people could maybe craft a bunch of arp requests with lots of different IPs and fill up the table (lots of other ways you might prevent this, but this seems like a simple way that would work).

share|improve this answer
Operating system is Windows Server 2008 R2 - It's a Dell Poweredge R310! – Trinitrotoluene Oct 12 '12 at 13:26
You might also be interested in looking at the tool ettercap. Allows you to play with some ARP attacks (Use it for good of course, and only in lab/home environments). – Kyle Brandt Oct 12 '12 at 13:53

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.