Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I recently bought a used Sun Blade 2500 Silver. The system has been completly wiped, so I get an OpenBoot prompt when I boot.

When I look on Oracle's compatibility page, I can see the station is able to run Solaris 10 8/11. So I downloaded the OS from the Oracle website.

According to the documentation I found, to install Solaris 10 from OpenBoot should be quite easy: put the DVD in the player, enter boot cdrom and then follow the instruction on screen.

Problem is, when I enter boot cdrom, I get the following message:

read failed

Evaluating:
The file just loaded does not appear to be executable.

I checked the DVD-ROM is able to read DVD-R. It is. And now, I have no further idea. Any clue?

share|improve this question
    
Did you download the SPARC iso ? How did you record it ? –  jlliagre Oct 16 '12 at 7:32
    
Yes, I downloaded the Sparc iso on the indicated website, and burned a DVD-R. –  Alexis Dufrenoy Oct 16 '12 at 8:05
    
Then the more likely reason would be a corrupted media. Make sure the iso is correct and try using a different tool to record it. –  jlliagre Oct 16 '12 at 10:25
    
I can open the iso with Daemon Tool, and I can read the DVD I burned. Anyway, I went through the whole process again, and the result is the same. As the workstation is used, could it be the DVD reader is broken? Would I get this message? How could I check it? –  Alexis Dufrenoy Oct 17 '12 at 18:48
    
You might want to try this live cd instead of a dvd: alexeremin.blogspot.fr/2009/11/… , also, try using a different recording program, as I already suggested. –  jlliagre Oct 17 '12 at 21:09
show 4 more comments

1 Answer

up vote 2 down vote accepted

As the the comments demonstrate, the SB2500 has issues reading the DVD. Usual causes are either in the recording side, some DVD recording applications cannot refrain to modify the iso they record, the media, or the server side, for example dvd recorded at too high a speed for the drive to properly read it.

Often, using a CD recorded, especially at a lower speed, instead of a DVD allows booting which is what you experienced with the livecd.

Unfortunately, there are no more Solaris 10 CD distributions available so the alternative would be a network boot. This would require another Solaris server running which I'm afraid is a catch22 situation in your case ...

share|improve this answer
    
Do you know a DVD recording software which could do the job? And are you seriously implying that the "readability" depends on the recording speed? –  Alexis Dufrenoy Oct 23 '12 at 9:09
    
You are right. I ordered a Solaris 10 Media Pack from Oracle, and now, my system is almost up and running... shop.oracle.com/pls/ostore/… –  Alexis Dufrenoy Nov 13 '12 at 18:57
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.