Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I want to block p2p and torrent connection without any firewall or server-side software installation.

Most of all it is FREE.

Thanks.

share|improve this question
    
Why is this tagged with thin-client? If you're not blocking at the firewall or the server, are you looking for a client solution? More information about the machines generating the P2P and why you don't have the ability to block at the appropriate points in the network would be helpful. –  Kevin Kuphal Jul 22 '09 at 13:23

6 Answers 6

You probably have a pair of scissors somewhere; that'll block peer-to-peer software without costing anything, installing a firewall, or installing any software on a server.

share|improve this answer
    
You are right.., and that's the first option..., and this is only my second option..., because of cost. Thanks buddy. –  Nathaniel Varona Jul 22 '09 at 10:57

Is this for a single computer, or an entire network? If its a single computer, configure the windows firewall manually. If its a network, configure the windows firewall via GPO. (IF you are running AD, that is)

You could also look into OPENDNS.com filtering as well.

share|improve this answer
    
+1 - this was my answer. Monitor the network traffic, determine ports and executables used for P2P, and make sure the Windows Firewall is set to block those through GPO. –  Jeff Miles Jul 22 '09 at 13:54

WinXP SP2 and higher has a built-in firewall. That software can be configured to block all kinds of things, and it is already paid for.

Take a look at the configure and edit your question to be more specific, I'm sure you will get more specific answers

share|improve this answer

Try to decrease halfopen connections limit to minimum (i.e 1 or 2) it'll make p2p almost unusable, but also will cost you slow browsing speed

share|improve this answer

I would reccomend going with a P2P IP-Filter list. They're freely available. One in particular that I use is from:

http://blocklistpro.com/download-center/ip-filters/

And it's free. Migrate that to each users hosts file and flush the machines dns:

Start -> Run - > cmd ipconfig /flushdns

share|improve this answer

Get a Linksys WRT54G and put a 3rd party firmware on it (DD-WRT2.4+) that has bandwidth management functions. Then you can restrict bandwidth by port and/or ip address.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.