Using the Wireless Fusion management tools for the Symbol / Motorola MC3190, we cannot get the handheld to associate to the WiFi access point. Using the Find WLANs feature in the Fusion software, we can see that the device is detecting the access point, as it does show up in the list of detected WLANs. So since it can see the available WLANs, the radio / hardware is seemingly working just fine. The access point is using WPA2 AES for security and other devices have no problem associating to it. It is a non-Enterprise level access point, so the Security Mode selected in the Fusion WLAN profile is "WPA2 - Personal". The only clue it seems to provide is in the Log information in Fusion Wireless Status. In the log it is showing the message "Association timeout" about 10 seconds after the "Setting SSID:" message.
Here is what I finally found:
To enable the MC31XX device to associate to the AP, go into the Fusion tool and select Options.
From the list of available options, select Regulatory from the dropdown.
Then uncheck the option Enable 802.11d.
protected by Tom O'Connor Apr 25 '14 at 9:10
Thank you for your interest in this question.
Because it has attracted low-quality answers, posting an answer now requires 10 reputation on this site.
Would you like to answer one of these unanswered questions instead?