Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I am trying to create and install a debain NAS and ive been having a hard time because I am new to all of this. I used ntfs-3g in order to automount my 4 NTFS drives. I also have a partitioned harddrive which is for the OS.

When I was working on it and I ran this command I got this:

fdisk -l

  • /dev/sdae1

fdisk -l | grep NTFS

  • /dev/sda1
  • /dev/sdb1
  • /dev/sdc1
  • /dev/sdd1

The weird thing is, all of the NTFS harddrives listed had an ID of 7.

The next time I boot up my machine, I get an error about mounting /dev/sda1 and I run this command, and get the following results:

fdisk -l | grep NTFS

  • /dev/sdb1
  • /dev/sdc1
  • /dev/sdd1
  • /dev/sde1

I havent plugged in any drives, so whats going on? How to I make sure that my drives are mounted with the same sdXX name every time, and is the reason for this because they dont have unique ID numbers, if so, how do I solve this?

share|improve this question
    
Why would you have NTFS filesystem on a Linux NAS? –  Zoredache Oct 28 '12 at 0:37

1 Answer 1

up vote 3 down vote accepted

Mount the disks via labels or UUIDs.

The label approach:

Make sure you have ntfsprogs installed with apt-get install ntfsprogs. Then do

ntfslabel /dev/sdb1 ntfsdisk1 
... repeat for all drives 

in /etc/fstab replace the /dev/sdx1 part of the respective lines with LABEL=ntfsdisk1 etc.

share|improve this answer
    
ntfslabel is an unknown command. How should I be renaming them? –  James Willson Oct 27 '12 at 22:57
    
See my edit, you are missing a package. –  Sven Oct 27 '12 at 23:00
1  
Also, I would consider your general approach with NTFS formatted disks less than optimal. Why don't you build a software RAID (RAID 6 or 10) with a Linux filesystem and export it via Samba? Is there a specific reason for this? –  Sven Oct 27 '12 at 23:03
    
As in, to have NTFS formatted disks is dumb? I should use linux formatted disks and then use samba to send it over? –  James Willson Oct 27 '12 at 23:13
    
Unless you have a specific reason to do this, I would say it's misguided (dumb is such a harsh word :)) . With a RAID, you loose in total capacity, but win in reliability because your data is not lost if a single disk fails. –  Sven Oct 27 '12 at 23:15

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.