Take the 2-minute tour ×
Server Fault is a question and answer site for system and network administrators. It's 100% free, no registration required.

My site and client site has same Lan IP range. Both using ASA version 8.4

Site A : 192.168.18.0 Site B : 192.168.18.0

Please tell me how to do Natting on 8.4

Any help would be highly appreciated.

Regards,

Kinnu

share|improve this question
    
How do you want the communication to look - since they're overlapping IP ranges, should they translate such that when site A gets communication from site B, it sees the traffic from site B's 192.168.18.100 as being from, say, 192.168.20.100? –  Shane Madden Oct 31 '12 at 5:41
    
Hi shane, I tried put in simple words below I have a site to site On ASA. MY network is 192.168.18.0/24 Clinet A : network is 192.168.0.1/24 Now recently one new client B is adding, Now i need to create a site to site VPN for client B as well. Client B: network is 192.168.0.1/24 Now both client A and Client B has same Lan network. Can you give tell me how to config. Thanks, Siva –  kinnu Oct 31 '12 at 10:35
    
Ok, got it. Are you able to make configuration changes on the ASAs at the client's side? –  Shane Madden Oct 31 '12 at 15:44

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Browse other questions tagged or ask your own question.