Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I have a new Server 2012 Essentials, which is a standalone Domain Controller. I am trying to join a client to the domain with an error regarding missing SRV record. I have joined one client to the domain already.

Where do I start, and how can I fix this in DNS? Can I just delete the zones and start over? Or is there a process to fix missing SRV records?

Probably a helpful Event:

Event ID 4013 The DNS server is waiting for Active Directory Domain Services (AD DS) to signal that the initial synchronization of the directory has been completed....

share|improve this question
    
is the w2k12 your only dns server? –  tony roth Nov 7 '12 at 16:35
    
yes sir there is only one server on the network –  Seth Nov 7 '12 at 16:45
    
while the second adapter is disabled, wait a while and see if that event resolves. –  scape Nov 7 '12 at 19:16
    
Well the second adapter has been disabled for a while, but it was enabled at one point during server setup. Would there be somewhere else this binding could be stuck? (Wish I knew why I was downvoted, seems like a pretty legit problem) –  Seth Nov 7 '12 at 19:23
    
what happens when you try nslookup and type in your domain name? and try it with FQDN. try this on both the server and your clients, both the joined and not-yet-joined. –  scape Nov 7 '12 at 20:01
show 2 more comments

4 Answers

You're going to want to provide more details about what's what's going wrong if you want a proper answer, but you can manually add an SRV record through the DNS manager. Probably not an optimal solution, because this is most likely a symptom of another problem, but that's how you add SRV records.

You should probably troubleshoot DNS on the client that's having the problem first, as the more likely source of the problem is the client not being able to reach the correct DNS server, than your DNS server(s) actually missing LDAP SRV records.

share|improve this answer
    
Client DNS is not an issue, fresh Win7 install. DNS shows pointing to server. Again, there's only one server. NSLOOKUP resolves to server with FQDN. Can ping server both IP and FQDN. I can see the ability to create the records, but I wouldnt have the slightest on how to properly do that. Nothing really special about this setup, its all new, fresh directory, fresh DNS, one client added. If I can provide something more specific let me know I can try to accommodate. –  Seth Nov 7 '12 at 16:17
    
@Seth Anything in the error logs on the DC? Precise error from the client? Health of the domain? Output of dcdiag.exe? –  HopelessN00b Nov 7 '12 at 16:26
    
..been looking through it now...here is a 1014 Warning: "Name resolution for the name _ldap._tcp.dc._msdcs.VUFOODSLLC.local. timed out after none of the configured DNS servers responded." The SRV record for this error is showing it's there FYI... DCdiag gives me no errors... –  Seth Nov 7 '12 at 16:38
    
@seth Name resolution [...] timed out after none of the configured DNS servers responded would tell you that your problem is that the client is not not able to communicate with the DNS server/Domain Controller for the domain you're trying to join. –  HopelessN00b Nov 7 '12 at 17:19
2  
@seth No, the error indicates that the communication to the DNS server is timing out. This is happening while it's looking for the LDAP SRV record, but the problem is with the communication timing out, not with the SRV record. (According to that error.) I really don't know what else to say, except that we're now getting the Please avoid extended discussions in comments message, but the problem is that the communication between this client and your DNS server is not happening, so that's what you need to fix. –  HopelessN00b Nov 7 '12 at 17:50
show 4 more comments

I've seen this as an issue with the domain server having two adapters and serving two disjointed networks, such as having both a public IP and private IP. I would first check the sites-manager, 'Sites and Services', and see how replication itself is holding up as the SRV record will automatically be removed in such situations.

share|improve this answer
    
run dcdiag and go over the output –  scape Nov 7 '12 at 18:08
    
I checked Sites, no replication. Secondary adapter has been disabled. Everything passes dcdiag as stated. Should I just rebuild the DNS? –  Seth Nov 7 '12 at 18:47
add comment

Why not use the connectcomputer process to join the domain? Essentials will autojoin without needing to do a manual join.

share|improve this answer
    
Please elaborate on this, as it stands, this answer doesn't appear to be very helpful. –  SvW Nov 8 '12 at 8:54
    
The connect program gives the same results. It does not perform any function you cannot perform manually. I have tried it for the record. –  Seth Nov 8 '12 at 14:00
add comment

I'm incredibly embarrassed to admit this but you guys have been helpful. I was adding the server host name to the domain during registration. Im terribly sorry, indeed, bad question.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.