Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I am doing some consulting work for a previous employer upgrading and migrating old servers to new hardware.

There is an existing file server (HP ProLiant DL380) that has an tape backup drive connected; it is using a SCSI interface and I'm pretty sure it's using an internal SCSI card.

They are upgrading to a new server hardware (HP ProLiant DL160 G6). The old server is 2U, the new one 1U and we would want to move the tape drive to the new server, too. I'm trying to figure out if the SCSI card in the old server would be able to be installed in the new one or if we'll need to source a new card; mostly I don't know for sure the height of the card and if it's low-profile enough that it would fit in the new server.

There is not much of a technical resource onsite and the old server is in-use anyway so I would like to avoid making a trip in myself or trying to have someone onsite pop open the case and tell me what card is there.

It's running Windows Server 2003 - is there a way to tell from say Device Manager what make and model the SCSI card might be? Or any other system diagnostic program or something that would give me hardware info like that?

Thanks for any info!

share|improve this question

3 Answers 3

In Device Manager under SCSI and RAID controllers you should see the SCSI card and should be able to get the info you need.

share|improve this answer
    
That will tell you the driver being used. It might not map to the exact model nomenclature used by HP, however. –  mfinni Nov 26 '12 at 3:46
    
I tend to spend time googling the DeviceID which is specific to a model, and just hoping that I see the same thing in someone elses pastebin that helps me identify it –  Mark Henderson Nov 26 '12 at 4:29

Both 1 and 2U servers should have a riser card with the PCI cards being installed sideways. The same cards should fit in both servers.

share|improve this answer

This can be viewed remotely via wmic.

Command Prompt > WMIC /NODE:hostname DISKDRIVE >C:\diskdrive.txt

Output will provide you with a variety of parameters among which are

  • Device ID (SCSI\DISK&VEN_ADAPTEC&PROD_ARRAY&REV_V1.0\5&1AD12BA&0&040000);
  • Model (IBM ServeRAID M1015 SCSI Disk Device);
  • Firmware ver.;
  • etc.

Here is an example of info gathered from IBM server (txt file output has more human-readable format).

enter image description here

share|improve this answer
    
Thanks, this looks like it would help a lot! It looks like the DISKDRIVE option dumps info about hte physical disk drive management. Would this include internal SCSI cards and external tape drives, though? Or is there a more appropriate command? I see there's a "SCSICONTROLLER" command, too. –  Peter Tirrell Nov 27 '12 at 15:06
    
Seems like for external tapes this switch "TAPEDRIVE" should be used. More commands –  Volodymyr Nov 27 '12 at 15:16

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.