Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I'm trying to get my HP T5740 thin clients to connect to my local network without much success. I asked a question here but haven't got any response. I think that question should have been posted on serverfault instead.

I was thinking that the problem seems to be that the thin clients aren't able to get an IP address when they are connected and I can't manually set it. So if I was to somehow set up a dhcp server on the network with my server that runs a 32 bit version of windows 7 ultimate edition.

How do we set up a dhcp server in windows?

share|improve this question
    
What's preventing you from setting the IP-address manually? –  Sandokan Dec 5 '12 at 8:42
    
Windows 7 Embedded should allow you to set the address manually - can you set the static IP on the machine but it gets lost after reboot? –  tombull89 Dec 5 '12 at 8:52
    
Also, Windows 7, as it is a desktop OS, does not have a DHCP server role. You'll need a Server OS for that, or consider using something like TFTP32 which can provide DNS, DHCP and TFTP services. –  tombull89 Dec 5 '12 at 8:54
    
Please post some information about your clients and your network. There's no reason why you can't use static ip's with thin clients, and nor is running a dodgy dhcp server on your client OS the answer. Why can't these machines get a DHCP address from your infrastructure? –  Dan Dec 5 '12 at 9:12
    
Install your favorite virtual machine software. Create VM, bridge network, install Linux, setup dhcp server. Done. It would be far better to install Linux natively on a device though. –  Zoredache Dec 5 '12 at 9:19
show 1 more comment

1 Answer

up vote 1 down vote accepted

You absolutely can set a static IP on the HP T5740 - in fact, for the most part, they work just like full fat Windows. What problem are you having? I presume you've been logging in as admin and committing / disabling the write filter?

share|improve this answer
    
How do I log in as the administrator? It automatically starts up and then there is no option in the control panel for me to manage the network connection. –  nikhil Dec 5 '12 at 10:10
1  
You need to log out and hold down shift to prevent it from logging in automatically. From there you can log in as the administrator - I recommend you take a read through the HP documentation first. –  Dan Dec 5 '12 at 10:18
    
Thanks for this tip. Can I also Install other hardware drivers while running as the administrator? –  nikhil Dec 5 '12 at 16:36
    
@nikhil You certainly can –  Dan Dec 5 '12 at 16:53
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.