Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I am trying to hot-add a file-based disk to a running KVM virtual server. I've created a new disk from scratch using the command

dd of=/home/cloud/vps_59/test.img bs=1 seek=5G count=0

and I was hoping to get it hot-added to the guest by doing this in the virsh shell:

virsh # attach-disk vps_59 /home/cloud/vps_59/test.img \
        vdd --driver=file --subdriver=raw

The XML definition of the domain then becomes:

<disk type='file' device='disk'>
  <driver name='qemu' type='raw'/>
  <source file='/home/cloud/vps_59/root.img'/>
  <target dev='vda' bus='virtio'/>
</disk>
<disk type='file' device='disk'>
  <driver name='file' type='raw'/>
  <source file='/home/cloud/vps_59/test.img'/>
  <target dev='vdd' bus='virtio'/>
</disk>

As you can see, the driver name becomes wrong, it should be driver name='qemu' as the existing vda disk. I have tried with --drive=qemu but it states it is unsupported.

Secondly, I only "see" the newly added drive once I reboot the virtual machine running Ubuntu 10.04.4 LTS. How can I make the drive "hotplug"? I want the virtual machine to "see" the new drive immediately without a reboot.

share|improve this question
1  
Unrelated suggestion, use qemu-img instead of dd - its arguments come more natural and does the same thing: qemu-img create test.img 5G –  chutz Dec 12 '12 at 0:05

1 Answer 1

I'd like to start with a note that you should avoid using virsh attach-disk with its limited amount of options. Instead, I'd suggest to specify the exact disk format you prefer in a separate, temporary XML file or by using the virt-manager GUI application (for the latter, skip the first step).

  1. Create a temporary file with a disk definition like this one below.

    adjust the properties to fit your situation

    <disk type='file' device='disk'>
      <driver name='qemu' type='qcow2'/>
      <source file='/path/to/disk-image.img'/>
      <target dev='vdb' bus='virtio'/>
    </disk>
    

    Tip: Peek into your current XML domain configuration and copy a <disk> section from there.

    virsh dumpxml <domainname>
    
  2. Now, before adding the disk to a current domain, make sure the required hotplug kernel modules are loaded in the guest.

    Some Linux distributions like recent CentOS/RHEL/Fedora have this built-in in the kernel. In this case, check for CONFIG_HOTPLUG_PCI_ACPI. If it's y, then you're all set and you can skip this step.

    modprobe acpiphp
    modprobe pci_hotplug
    

    Consider adding these two modules to /etc/modules if you want them to be loaded on boot by default.

  3. Add the disk it to the running VM using

    virsh attach-device <domain name> /path/to/disk.xml
    

    Optionally, add the --persistent option to let Libvirt update the domain XML definition 'persistent'.

  4. Finally, check inside the guest if the disk was indeed hotplug-inserted. The kernel should be triggered, as can be checked with dmesg:

    [  321.946440] virtio-pci 0000:00:06.0: using default PCI settings
    [...]
    [  321.952782]  vdb: vdb1 vdb2
    

    In the above example I've added a disk as vdb with two partitions in the partition table.

References

share|improve this answer
    
Shouldn't you also add --persistent to make sure this configuration does not get lost when you power off the virtual machine? –  chutz Dec 12 '12 at 0:06
    
@chutz yes, thanks. updated my answer. –  gertvdijk Dec 12 '12 at 0:11

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.