I am working on a thesis research project, and I am having some difficulty figuring out how to get
iptables (running on the KVM host) to block traffic (or rather, manipulate traffic) destined for a BRIDGED KVM guest. I am unable to get the
iptables entries (pasted below) to block traffic to and from the VM's.
Effectively, I would like my host system to act as a firewall for those guest VM's, and for the time being, I would like to test this capability by simply dropping all packets that is destined for a specific VM. In the not-so-distant future, I would also like to implement more granular controls, and even have a proxy involved. Again, this should happen entirely at the HOST level, and not at the GUEST level.
I am running CentOS 6, and based on another question that I wrote: Use one NIC to create multiple interfaces for Linux KVM, I have the following interfaces configured:
eth0 br0 tap0
Below is my network setup scripts for each interface:
DEVICE="eth0" BOOTPROTO="none" NM_CONTROLLED="no" ONBOOT=yes TYPE="Ethernet" UUID="<<UUID-HERE>>" HWADDR=<<MAC-ADDR-HERE>> DEFROUTE=yes PEERDNS=yes PEERROUTES=yes IPV4_FAILURE_FATAL=yes IPV6INIT=no NAME="System eth0" BRIDGE="br0"
DEVICE="br0" TYPE="Bridge" ONBOOT="yes" BOOTPROTO="dhcp" DELAY=0
DEVICE="tap0" TYPE="Tap" BRIDGE="br0" ONBOOT="yes"
I have a CentOS 6 VM running and it is configured to utilize the
tap0 bridged interface. Networking on the VM is working properly. No other changes to the host system were made.
Below are the non-functioning
iptables rules that I added to the
FORWARD chain (it is worth noting that I am not a huge expert on
sudo iptables -I FORWARD -i any -o tap0 -j DROP sudo iptables -I FORWARD -i tap0 -o any -j DROP
After running the commands, the
FORWARD table looks like this:
Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 DROP all -- tap0 any anywhere anywhere 0 0 DROP all -- any tap0 anywhere anywhere 0 0 REJECT all -- any any anywhere anywhere reject-with icmp-host-prohibited
Unfortunately, this does not block the traffic. I don't understand why this would not work.