Server Fault is a question and answer site for system and network administrators. It's 100% free, no registration required.

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

Sometimes when debugging SMTP issues the standard maillog is not enough and I need to see the full SMTP session. In postfix I add the problematic IP to "debug_peer_list" which will enable the session log and other debug information for only that IP.

Is there a similar thing in exim? I have only found references to "running exim in debug mode" which apparently causes ALL sessions to be logged which I fear will quickly write tons of unnecessary logs, cause heavy disk I/O, and make it hard to find the transaction in question

TL;DR: What is the best way to get a full SMTP transaction log from a specific IP (or sender address) ?

I'm running exim 4.80 (a cpanel server).

share|improve this question
up vote 4 down vote accepted

You can easily look at the commands received from the remote system with a few ACL additions:

# Global hosts setting
hostlist debug_hosts = : yyy.yyy.yyy.yyy

# early in acl_smtp_helo
warn hosts     = +debug_hosts
     log_write = DEBUG: $smtp_command

# early in acl_smtp_mail
warn hosts     = +debug_hosts
     log_write = DEBUG: $smtp_command

# early in acl_smtp_rcpt
warn hosts     = +debug_hosts
     log_write = DEBUG: $smtp_command

But if you want to see in the logs what your side is saying too, that's not possible inside exim. Your options are then constrained to any system provided network debugging tools, such as tcpdump, tshark, or (my favorite) ngrep.

As an example, if you have a customer who complains they cannot send mail through your server. Here's a simple entry that shows why they are unable to send:

# ngrep -q port 25 host
T -> [AP]
  AUTH PLAIN kkvdsoirDSAasdfrASDF4swSD23DAGAG6893Mgss==..                            

T -> [AP]
  535 Incorrect authentication data..

I hope that one of these proves to be useful for you.

share|improve this answer
very informative, thanks! "not possible" is not the answer I was hoping for obviously, but having one side of the chat protocol is already something. I currently use network debuggers for this task, its just a PITA to dissect the TLS sessions, so I was looking for a simpler solution within the MTA – Gryphius Jan 1 '13 at 14:43
I am getting the following error , option "hostlist" unknown and exim start fails. – Mani Mar 11 at 16:03 : yyy.yyy.yyy.yyy ==> What are these ? Client or server IP address ? – Mani Mar 11 at 16:04

Possibly not what you're after, but wireshark / tshark is great for this. On the command line:

tshark -w exim.pcap -i <interface> host <target IP>

Then open the file in Wireshark and you can peruse the whole SMTP conversation at your leisure: Right-click on one matching packet and select 'View TCP Conversation'.

If you want to see it as it happens, just omit the -w argument from the above, though that can be pretty spammy with large emails.

share|improve this answer
thanks, that's my current workaround, but it's very cumbersome, especially when you have to deal with TLS sessions. I was hoping there is an easier way within exim. – Gryphius Dec 31 '12 at 15:09

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.