Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

I have a network like this :

Client 1 <== Wireless ==> Access Point <== Wire ==> DC <== Wireless ==> ADSL Modem

Client 1 :

IP : 192.168.1.181
DG : 192.168.1.100
DNS : 192.168.1.100

Access Point :

IP : 192.168.1.10
DG : 192.168.1.100

DC :

IP : 192.168.1.100
DG : 192.168.1.1
DNS : 127.0.0.1

ADSL Modem :

IP : 192.168.1.1

I can ping yahoo.com from client1, but cannot browse the internet. UPDATE1 : my DC has two network interfaces that I bridge together.

UPDATE2 : I powered down the DC firewall

UPDATE3 : I set a forwarder for my DC to 8.8.8.8 (Google dns)

share|improve this question

3 Answers 3

By DC, i assume you mean Domain Controller? If so, you are doing it wrong. The DC should handle your DNS, but not be a gateway. Put a proper router into your network topology.

Internet > ADSL modem > Router/firewall/gateway device > Switch > Servers/clients/access points/etc

share|improve this answer
    
Which gateway and DC I should install kerio on it ?!! –  Ali Foroughi Jan 2 '13 at 15:34
    
What Kerio product? –  DanBig Jan 2 '13 at 16:51

Since all your machines are numbered in the same subnet, you are bridging. But you cannot bridge to a WiFi client connection (that's why WDS has to be enabled on both sides). If the DC is connected to the ADSL modem by wireless as a client, it cannot bridge to additional machines on the same network.

WiFi is not wireless Ethernet. It's its own protocol with its own rules. You can't treat a client link to an access point like a wired connection. Unfortunately, WiFi is enough like Ethernet that it's easy to think it's a drop in replacement for a wired link. It is not.

share|improve this answer

Your DNS is wrongly configured on the DC it should be 127.0.0.1 pointing to itself as the DNS server

share|improve this answer
    
I update my question , It is a syntax mistake .sorry about that –  Ali Foroughi Jan 2 '13 at 15:38
    
Do you know on witch gateway and DC I should install kerio on it ?! –  Ali Foroughi Jan 2 '13 at 15:38

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.