Server Fault is a question and answer site for system and network administrators. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I have three 2TB drives in the machine; I want a RAID5 of ~4TB capacity, and 100GB or so of swap space. No LVM, no encryption, no fanciness. This is easy to do using the interactive installer, but I'm hoping to basically preseed this whole setup.

I had originally planned for the swap space to just be three separate partitions (one per drive, let the kernel do the striping), but then I had read that having the swap as a second RAID1 can be better for the kernel when losing a drive (and as a bonus, the 12.04 example preseed covers this exact scenario).

Here's what I have so far:

d-i partman-auto/disk string /dev/sda /dev/sdb /dev/sdc
d-i partman-auto/method string raid
d-i partman-lvm/device_remove_lvm boolean true
d-i partman-md/device_remove_md boolean true
d-i partman-auto/choose_recipe select base
d-i partman-auto/expert_recipe string        \
      base ::                                \
         1800000 20 2000000 raid             \
            $primary{ }                      \
            method{ raid }                   \
            format{ }                        \
         .                                   \
         100000 10 200000 raid               \
            method{ raid }                   \
            format{ }                        \

d-i partman-md/confirm boolean true
d-i partman-auto-raid/recipe string          \
    5 3 0 ext4 /                             \
      /dev/sda1#/dev/sdb1#/dev/sdc1          \
    .                                        \
    1 3 0 swap -                             \
      /dev/sda5#/dev/sdb5#/dev/sdc5          \

At various points in my fiddling, I had it running all the way through successfully, except that the swap partitions were 1TB in size (way too big). At other times, it would work successfully except with no swap partitions created at all. With the current iteration (above), it runs, but gives errors about partitions being in use, or being otherwise unable to proceed. I have tried using dd to zero out the first 512 bytes of each drive, but it doesn't seem to make a difference.

If it would be helpful to do so, I can try to provide a syslog of such a session.

Unfortunately, documentation on the partman preseed options seems a little hazy. Is there an obvious mistake in the above configuration? Thanks for any help.

share|improve this question

closed as too localized by Ward, mdpc, Khaled, Tom O'Connor, Skyhawk Jan 8 '13 at 12:40

This question is unlikely to help any future visitors; it is only relevant to a small geographic area, a specific moment in time, or an extraordinarily narrow situation that is not generally applicable to the worldwide audience of the internet. For help making this question more broadly applicable, visit the help center.If this question can be reworded to fit the rules in the help center, please edit the question.

Hmm, I'm disappointed this question was closed. I would have thought that preseeding a basic RAID configuration would be the type of information others might find useful. – mikepurvis Jan 8 '13 at 20:10
That wasn't what was asked, though. You asked about RAID 5 for a huge volume. Bad. If edited, this might be a candiate for reopening, but as it's specifically ubuntu, you'll probably get a more authoritative answer on askubuntu. – Tom O'Connor Jan 8 '13 at 20:23

You don't.

RAID 5 is dead. Expecially for 4TB volumes. The probability of an unrecoverable read error whilst rebuilding a degraded array is high enough not to want to take the risk. If it happens, your array is gone. All of it.

RAID 6 is the only feasible way to go forward if you want a RAID-5-like array.

share|improve this answer
That's a helpful article, thank you. Can you recommend some resources on preseeding a RAID6 configuration? – mikepurvis Jan 8 '13 at 18:49
I don't know of any I'm afraid. Try asking specifically for that here – Tom O'Connor Jan 8 '13 at 20:09

Not the answer you're looking for? Browse other questions tagged or ask your own question.