Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

Does anyone know how to add a NAS that is attached via esata (using ISCSI) to an ESX5.1 Hypervisor ?

Thanks,

share|improve this question

closed as not a real question by MDMarra, Basil, mdpc, Alex, TomTom Jan 16 '13 at 21:24

It's difficult to tell what is being asked here. This question is ambiguous, vague, incomplete, overly broad, or rhetorical and cannot be reasonably answered in its current form. For help clarifying this question so that it can be reopened, visit the help center.If this question can be reworded to fit the rules in the help center, please edit the question.

6  
This doesn't make sense. If it's attached physically via eSATA, it's not iSCSI and if it's iSCSI or eSATA, it's not NAS, it's either SAN or DAS respectively. –  MDMarra Jan 16 '13 at 20:33
1  
Please provide the made/model of the storage unit you are attempting to connect to your ESXi system. –  ewwhite Jan 16 '13 at 20:46
    
Sorry for the lack of information. I have a QNAP TS-412 which is named as a NAS but has 2xGig ports and 2xESATA ports. The box supports SMB, NFS and ISCSI. Im trying to attach the device to my ESX5 box directly via esata and to my network using the gig ports. The network side is working fine. –  felix001 Jan 16 '13 at 20:49
3  
Ah, whow. Talk of someone not reading documentation. The eSata port on those things is not meant to attach to another computer, but to additional discs. Just checking. You DEFINITELY can not attach a computer via eSata using ISCSI - that is a mixture telling me "go and read computers 101". ISCSI - the I is IP, that is a network protocol, eSata is a SATA port, that is not a network card at all. That is like saying "I want to attach a rocket booster to my mercedes so I get faster into orbit". Mixing technologies regardless of use case. –  TomTom Jan 16 '13 at 21:07
    
We have some TS-412's. They're nice devices, but their iSCSI sucks. Even the slightest IO load makes the CPU peg at 100% and the unit becomes basically unusable. It's OK for testing stuff out and in a lab with a small budget, but I wouldn't ever use one in production. –  Mark Henderson Jan 16 '13 at 21:12

3 Answers 3

up vote 3 down vote accepted

I have quite a few TS-412's and yes, you can connect them to ESXi or Hyper-V (or any iSCSI initator for that matter), but I strongly advise against it:

  1. The iSCSI protocol is quite a heavy protocol, and the TS-412's have a very low powered CPU (they are, after all, a NAS). With one or two guests powered up, even slight I/O within the guest VM makes the TS-412 peg its processor at 100%
  2. ESXi and TS-412 both support NFS. Use that instead. It's not as heavy of a protocol and doesn't have the same impact on the poor TS-412 as iSCSI does
  3. To actually do these two things, there are literally a hundred tutorials out on the internet. Once you find one, and you get stuck, then feel free to ask a more specific question.
share|improve this answer
1  
I assume he is here because 1g is too slow, he wants the nic speed of esata and none of the tutorials cover how to get iscsi working on the esata port ;) –  TomTom Jan 16 '13 at 21:23
    
Tom Tom you`ve made you point ;-) Thanks for the response Mark Henderson would you suggest NFS or SMB with the TS-412`s ? –  felix001 Jan 16 '13 at 21:26
1  
@felix001 - again, you might want to brush up on your ESXi documentation. It does not support SMB, so NFS is your only choice. –  Mark Henderson Jan 16 '13 at 21:32

The documentation for that device states on page 572 what the eSata port is for.

First, eSata is not a network port - and IScsi is a network protocol. Regardless what you want, you wont run iSCSI over it.

Second, it is a master side port - to attach additional hard discs, not to connect upstream. Yes, all those dreams of fast performance just went out. Your car also won't fly you to the moon - wrong technology.

You can add (eSata) enclosures or dis there, but that is it. You HAVE to use the 1G network ports for ISCSI.

share|improve this answer
    
thanks for clearing that up. –  felix001 Jan 16 '13 at 21:29

Are you talking about directly connecting the storage to the hypervisor host and sharing out the NAS as a volume via iSCSI?

If that's the case instead of doing that you can configure the esata device as a passthrough to the VM guests. Here's a video walkthrough courtesy of youtube. Google "esxi storage passthrough esata" for more.

share|improve this answer
    
THat would be nice except that the eSata port on those things is not meant to attach to a computer and that he wants to do that using ISCSI over ESata. –  TomTom Jan 16 '13 at 21:09
    
fwiw this answer was posted before the OP had posted anything even remotely informational. –  Mark Henderson Jan 16 '13 at 21:18

Not the answer you're looking for? Browse other questions tagged or ask your own question.