Take the 2-minute tour ×
Server Fault is a question and answer site for professional system and network administrators. It's 100% free, no registration required.

ntpd listens on numerous interfaces by default, I only want it to listen on 127.0.0.1:123 since I only want the localhost to sync the time.

How to do that, I tried by editing /etc/default/ntp on Debian Wheezy:

NTPD_OPTS='-4 -I 127.0.0.1'

But it still listens globally on 0.0.0.0:123

Any ideas?

share|improve this question
    
I'm curious what your ultimate goal is here. Syncing with localhost doesn't make a lot of sense and won't work at all by default without a fudge statement. What are you trying to achieve? –  Ladadadada Feb 5 '13 at 15:28
    
@Ladadadada We have a ntp server here within the LAN. Our linux clients should have the correct time, but instead of running an hourly cronjob ntpdate -B timeserver we wanted to run a ntpd on every client with only 127.0.0.1:123 which asks the timeserver in the LAN. Is there something wrong with it? –  Ian Feb 5 '13 at 15:39
2  
On a client, the listening port is only used for querying the current state of the daemon. The server lines in your ntpd client configs define who you sync with. If your server line(s) say 127.0.0.1, you have a problem. If they point to your central timeserver, it should all be fine. –  Ladadadada Feb 5 '13 at 15:47

3 Answers 3

up vote 14 down vote accepted

Remove all -I or --interface options from /etc/default/ntp and insert the following into your /etc/ntp.conf:

interface ignore wildcard
interface listen 127.0.0.1
# NOTE: if you want to update your time using remote machines,
# add at least one remote interface address:
#interface listen 2001:db8::1
#interface listen 192.0.2.1

An excerpt from the ntpd(1) manual page about the -i option:

This option also implies not opening other addresses, except wildcard and localhost. Please consider using the configuration file interface command, which is more versatile.

See also the Debian manual page (I could not find it in Arch Linux one) of ntp.conf(5).

share|improve this answer
    
Perfect, thanks a lot! –  Ian Feb 5 '13 at 14:51

Full /etc/ntp.conf that protocol neutral (IPv4 &| IPv6)

driftfile /var/lib/ntp/ntp.drift

statistics loopstats peerstats clockstats
filegen loopstats file loopstats type day enable
filegen peerstats file peerstats type day enable
filegen clockstats file clockstats type day enable

server 0.pool.ntp.org
server 1.pool.ntp.org
server 2.pool.ntp.org
server 3.pool.ntp.org

restrict -4 default kod notrap nomodify nopeer noquery
restrict -6 default kod notrap nomodify nopeer noquery

restrict lo

interface ignore wildcard
interface listen lo
share|improve this answer

With ntp listening only on 127.0.0.1, it looks like it can't initiate connection to a public ntp server :

ntpq -p remote refid st t when poll reach delay offset jitter ============================================================================== ks370079.kimsuf .INIT. 16 - - 64 0 0.000 0.000 0.000

It must be bind to a routable ip address to work.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.